ACRIL SILOX INDOOR
Water-based wall paint
Excellent adhesion, water repellency and breathability
for interior and exterior.
Code
0898
Description
Wall paint based on siloxane resin and acrylic, with excellent coverage and washability.
Use
Thanks to its quality it is suitable for the decoration and protection of new and in-phase supports for plasterboard and plasters of various composition (cement, lime base and premixed). It has a beautiful aesthetic both white and colored.
Appearance of the film
Matt
Coverage
Excellent
Dirt retention
Low
Color
White - color chart
Components
1
Hardening
Physical by evaporation of water.
Specific weight
1,430 gr/ml
VOC
25 gr/ litro
Theoretical yield
9 – 10 mq / liter per hand (depends on the absorption of the support)
flash point
> 100°C
Washability
> 10000 washes
Capillary Absorption
DIN 52615: Sd=0,14 m
Adhesion
ISO 2409: Excellent
Sfarinamento
ISO 4628-6: Ottima
Temperature resistance
Max 60°C
Water vapor permeability
ASTM D 1653-72: 752,2 g/mq d; 1988,6 g/mq d (interpolated steam of the support)
Environmental conditions
Ambient temperature: fda + 5 a 40°C
Temperature of the support: > 10° C
Humidity: 0 - 85 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Temperature of the support: > 10° C
Humidity: 0 - 85 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Precautions:
Do not apply on wet or un-seasoned substrates.
. Do not apply at temperatures below 10 ºC
The humidity of the support must be less than 10%.
. Do not apply at temperatures below 10 ºC
The humidity of the support must be less than 10%.
Drying and hardening time
For thicknesses of 50 microns 10°C 20°C 30°C
Dry to the touch 3 1 0,5 ore
Deep dry 8 4 -5 2
Dry to the touch 3 1 0,5 ore
Deep dry 8 4 -5 2
Time of overpainting
Minimum (hours) 10°C 20°C 30°C
8 4 3
Maximum unlimited in the absence of contaminants
8 4 3
Maximum unlimited in the absence of contaminants
Application
Brush, roller, spray
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
Stock duration
2 years in a cool and dry place (max 40° C)
Packaging
2,5 ,5, 14 lt