ACRIL SILOX PRIMER
Acrylic siloxane - based primer paint
Good penetration and water repellency
Suitable for outdoor and indoor use
Description
« ACRIL SILOX PRIMER » is a pigmented and fixative stabilizing product, consisting of acrylic and siloxane resins in emulsion and various additives.
Fundamental features of the binder are its being completely unsaponifiable, its strong penetrating and cementing power, its breathability, and its water repellency.
This primer paint is therefore ideal for consolidating and smoothing out both old and new plasters that are crumbly and very absorbent. « ACRYL SILOX PRIMER » not only improves the features of the plaster, but also allows for better application of all wall coverings, promoting perfect adherence.
Fundamental features of the binder are its being completely unsaponifiable, its strong penetrating and cementing power, its breathability, and its water repellency.
This primer paint is therefore ideal for consolidating and smoothing out both old and new plasters that are crumbly and very absorbent. « ACRYL SILOX PRIMER » not only improves the features of the plaster, but also allows for better application of all wall coverings, promoting perfect adherence.
Use
This product is suitable for consolidating and smoothing out new and old plasters, concrete surfaces, old paintings, provided they are dry and well adherent. It not only improves the features of the plaster, but also allows for better application of all wall coverings, promoting perfect adherence.
Appearance of the film
Matt
Color
White - color chart
Components
1
Hardening
Physical hardening through evaporation of water and union of the polymer
Specific weight
1,570 gr / ml
Volume of solids
45,5%
VOC
15 gr/ litre
Minimum thickness
50 microns
Estimated yield
9,1 m² / litre for a thickness of 50 microns
Flash point
Component A >113° C
Preparation of surfaces
Ensure that the surface is dry, that it has passed a curing time of 28 days and that its humidity is less than 10 %.
Removing efflorescence or parts of old paintings that are peeling off by washing and brushing. Completely remove old coats of lime or tempera paint.
Removing efflorescence or parts of old paintings that are peeling off by washing and brushing. Completely remove old coats of lime or tempera paint.
Preparation of the product
Mix the product before the use
Dilution
30 - 40 % with water
Environmental conditions
Ambient temperature: from + 5 to 35° C
Temperature of the support: > 5° C
Humidity: 0 - 75 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Avoid applications where there is surface condensation or direct sunlight.
Drying and hardening time
At 25° C and 65 % RH
35 - 45 minutes
35 - 45 minutes
Time of overpainting
4 – 5 hours
Application
Brush, roller
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
Shelf life
1 year in a cool and dry place (max 40° C)
Packs
Lt. 14 - Lt. 5 - Lt. 2,5