ACRIL STREET
Acrylic paint road marking reflective and non
Excellent resistance to abrasion
Excellent adhesion and elasticity
Description
ACRIL STREET is a product formulated according to the current European standards. It is based on acrylic and methacrylic resins, selected and precious pigments and glass beads in accordance with the standard for the reflective type. It has an excellent resistance to abrasion and adhesion to the surface, strong refraction, rapid drying, and excellent covering power
Use
The product is used as a road marking paint on asphalt, bitumen, concrete, etc.
Appearance of the film
matt
Colour
White, yellow, and other colours
Component
1
Hardening
Physical by evaporation of solvents and oxidative polymerization.
Specific weight
1,600 gr/ ml
Volume of solids
42%
VOC
620 gr/ liter
Minimum thickness
80 – 100 micron
Estimated yield
4,2 m² /L for a thickness of 80 microns dry
Flash point
Component A 27°C
Thinner 5°C
Thinner 5°C
Preparation of the product
Mix the product before use and add the thinner
Component A 100
Polyurethane thinner 5 – 10 % depending on the thickness of the dry film to be applied.
Component A 100
Polyurethane thinner 5 – 10 % depending on the thickness of the dry film to be applied.
Environmental conditions
Ambient temperature: from + 5 to 40°C
Temperature of the surface: > 10°C
Humidity: 0 – 85 %
To prevent the formation of condensation the temperature of the surface
must be at least 3°C higher than the dew point..
Temperature of the surface: > 10°C
Humidity: 0 – 85 %
To prevent the formation of condensation the temperature of the surface
must be at least 3°C higher than the dew point..
Drying and hardening times
For thicknesses of 100 microns 10°C 20°C 30°C
Dry to touch 30 12’ 5’
Dry in depth 1 h 30’ 20’
Dry to touch 30 12’ 5’
Dry in depth 1 h 30’ 20’
Application
Spray, brush, or roller for small surfaces
Shelf life
2 years in a cool and dry place (max 40°C)
Packs
Comp A 20 kg 5 kg Thinner Lt.5, Lt. 25