Code
1010
Description
Long-lasting and effective antifouling free of organo-stannic compounds.
Use
Suitable for all hulls and compatible with all primers, both synthetic and epoxy.
Appearance of the film
Opaque
Color
Red
Component
1
Hardening
Physical by evaporation of solvents
Specific weight
1,570 gr/ml
Volume of solids
45 %
VOC
320 gr/ liter
Minimum thickness
60 micron
Estimated yield
7,5 mq / litro per uno spessore di 60 micron secchi
Flash point
Componente A 34°C
Diluente 34°C
Diluente 34°C
Preparation of surfaces
Apply to prime, clean, contaminant-free substrates at least two coats for a total thickness of about 100 – 12
Preparation of the product
Synthetic thinner: Mix the product before the use and add the thinner
Component A 100
Thinner 5 – 10 %
Component A 100
Thinner 5 – 10 %
Environmental conditions
Ambient temperature: da + 5 a 40°C
Temperature of the support: > di 10°C
Humidity: 0 – 85 %
Ambient temperature: da + 5 a 40°C
Temperature of the support: > di 10°C
Humidity: 0 – 85 %
To prevent the formation of condensation, the temperature of the substrate must be at least 3°C above the dew point.
Temperature of the support: > di 10°C
Humidity: 0 – 85 %
Ambient temperature: da + 5 a 40°C
Temperature of the support: > di 10°C
Humidity: 0 – 85 %
To prevent the formation of condensation, the temperature of the substrate must be at least 3°C above the dew point.
Drying and hardening time
For thicknesses of 60 microns:
10°C: 6 hours touch, 12 hours deep
20°C: 6 hours touch, 6 hours deep
30°C: 2 hours touch, 4 hours deep
10°C: 6 hours touch, 12 hours deep
20°C: 6 hours touch, 6 hours deep
30°C: 2 hours touch, 4 hours deep
Time of overpainting
Minimum: 10°C - 12 hours; 20°C - 6 hours; 30°C - 4 hours
Maximum (months): unlimited
Maximum (months): unlimited
Application
Brush, roller, spray
For brush applications use nylon or pure bristle brushes.
For roller applications use medium-haired rollers.
For application use the cross-coat method.
For brush applications use nylon or pure bristle brushes.
For roller applications use medium-haired rollers.
For application use the cross-coat method.
Shelf life
2 years in a cool and dry place (max 40° C)
Packs
Comp A Lt. 2,500, Lt. 0,750 Diluente 5, 25, 180 lt