Description
Water borne paint based on vinylversatic resin, with good coverage
Use
Can be applied to new or old plaster, concrete, gypsum and plasterboard, old paintings. Has a good brushability, good coverage and abrasion resistance to dry.
Film appearance
Matt
Color
white
Component
1
Hardening
Water evaporation and polymer coalescence
Density
1,690 – 1,720 gr / ml
VOC
30 gr/ liter
Theoretical coverage
8 - 9 mq / litres on smooth substrates in the medium absorption.
flash point
Component A > 114°C
Surface preparation
New surfaces:
Make sure that the media is completely dry, in the presence of mold, treat the surface with suitable restorative.
Remove any efflorescence and loose paint by brushing and washing.
Prime with insulating acrylic.
Old coatings:
Remove old paint flaking, tempera paints and lime must be removed by brushing and washing
Make sure that the media is completely dry, in the presence of mold, treat the surface with suitable restorative.
Remove any efflorescence and loose paint by brushing and washing.
Prime with insulating acrylic.
Old coatings:
Remove old paint flaking, tempera paints and lime must be removed by brushing and washing
Paint preparation
Mix paint dilute with water
1° hand 20 – 25%
2° hand 10 – 15%
1° hand 20 – 25%
2° hand 10 – 15%
Environmental conditions
Temperatures: da + 5 a 35°C
Surface temperature: > di 5°C
Umidity: 0 – 75 %
Surface temperature: > di 5°C
Umidity: 0 – 75 %
Drying and hardening time
10°C 20°C 30°C
Dry to touch 3 1 0,5 hours
Dry in depht 6 2 1 hours
Dry to touch 3 1 0,5 hours
Dry in depht 6 2 1 hours
Time of overpainting
10°C 20°C 30°C
Minimum 6 2 1
Maximum unlimited in the absence of contaminants
Minimum 6 2 1
Maximum unlimited in the absence of contaminants
Application
Roller, brush, spray
Shelf life
Two years in a cold, dry (max 40°C)
Packs
Comp A Lt. 14; Lt. 5; Lt. 2,5.