BIANCO TIX
Water - dilutable paint
Excellent coverage
Breathable for internal spaces
Code
0814
Description
Paint in emulsion based on vynilversatic resin in water dispersion.
Use
This product is indicated for the painting of interior wall surfaces; it has a good covering power and it is breathable. It is easy to apply for its anti - drip power.
Appearance of the film
Matt
Color
White
Component
1
Hardening
Physical hardening through evaporation of water and union of the polymer
Peso specifico
Da 1,700 gr/ml
VOC
15 gr/ liter
Estimated yield
8 – 9 mq / liter for the smooth supports with medium absorption
Flash point
Component A > 114°C
Preparation of surfaces
New surfaces:
New plasters or patches must be well cured, clean, dry and free from white layers.
In the presence of mold, treat the surface with suitable restoring products.
Remove any efflorescence with brushing or washing.
Prime clean surfaces with water – based acrylic fixative products.
Already painted surfaces:
Remove old paints that are peeling off. Tempera and lime paintings must be completely removed with brushes and washes.
New plasters or patches must be well cured, clean, dry and free from white layers.
In the presence of mold, treat the surface with suitable restoring products.
Remove any efflorescence with brushing or washing.
Prime clean surfaces with water – based acrylic fixative products.
Already painted surfaces:
Remove old paints that are peeling off. Tempera and lime paintings must be completely removed with brushes and washes.
Preparation of the product
Mix the product before the use and add water:
Component A 100
Water max 25 - 30 % (first coat)
max 10 - 15 % (second coat)
Component A 100
Water max 25 - 30 % (first coat)
max 10 - 15 % (second coat)
Environmental conditions
Ambient temperature: from + 8 to 40° C
Temperature of the support: > 10° C
Humidity: 0 - 80 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Temperature of the support: > 10° C
Humidity: 0 - 80 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Precautions:
• Do not apply on wet or not well cured supports;
• Do not apply at temperature below 10° C;
• Do not apply when humidity is above 80 %, in case of imminent rain and in the presence of wind.
• Do not apply at temperature below 10° C;
• Do not apply when humidity is above 80 %, in case of imminent rain and in the presence of wind.
Drying and hardening times
10°C 20°C 30°C
Dry to touch: 4, 1, 0,5 hours
Dry in depth: 8, 4, 2 hours
Dry to touch: 4, 1, 0,5 hours
Dry in depth: 8, 4, 2 hours
Time for overpainting
Minimum (hours) 10°C 20°C 30°C
8 4 2 hours
Maximum unlimited in the absence of contaminants
8 4 2 hours
Maximum unlimited in the absence of contaminants
Application
Brush, roller
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
Shelf life
2 years in a cool and dry place (max 40° C)
Packs
L 14 L 5 L 2.5