Logo

BITUMPRIMER

Primer for bituminous Roofing

Excellent adhesion to Ardesian bituminous sheaths

Good penetration

prodottimuralidipreparazione

Code

0641

Description

Water-based fixative varnish made of styrene acrylic emulsions with internal plasticizing, used in building as a base coat. It is characterized by adhesion and good penetration to the surface.

Use

Suitable to block the dust and porosity of the new and old bituminous sheaths, thus allowing a valid anchorage to the installation of liquid sheaths.

Appearance of the film

Semigloss

Color

Colourless-Ivory

Component

1

Hardening

Physical by evaporation of water and coalescenze of the polymer

Specific weight

From 1,280 - 1310      gr/ml

Dry residue

48 %

VOC

25,6  gr/ liter

Estimated yield

200-400 gr/mq (according to the surface’s absorption

Flash point

> 60°C                                        

Preparation of surfaces

Perform an accurate cleaning by eliminating dust, parts being detaching, greasy and other contaminants. The support must be dry.

Preparation of the product

Mix the product before use. For roller and brush applications dilute the product with max. 5-10% water.

Environmental conditions

Ambient temperature:              from + 5 to 35°C
Temperature of the surface:     >10°C
Humidity:                                   5 – 85 %
To prevent the formation of condensation, the temperature of the surface must be at least 3 °c higher than the dew point


dry

Fuori polvere*                    1 hour
Fuori polvere*                    2-3 hrs
Dry in depth*                      12hrs
(*)The expressed times may vary depending on the increase or decrease in temperatures, the environmental conditions, the level of humidity in the air and the porosity of the support.

Application

It can be applied indifferently with a scrubbing brush, spray, roller and brush.

Shelf life

1 year in cool and dry place. The product does not tollerate the frost.

Packs

Lt. 14; Lt. 5