Code
0401
Description
Matt paint with a synthetic base, indicated as a first primer coat for wood and, after possible filling process, also as an undercoat. Its main functions are to adhere to the wood and penetrate more or less deeply into it in order to create a surface that is as waterproof as possible and to reduce wood absorption.
Its features are: good applicability with brush and spray, good fluidity, fast drying, good yield and coverage, easy dry sanding
Its features are: good applicability with brush and spray, good fluidity, fast drying, good yield and coverage, easy dry sanding
Use
This product is used as a primer coat on wood before applying synthetic enamels or as an intermediate paint on primed metal surfaces.
Appearance of the film
Matt
Color
white
Component
1
Hardening
Physical hardening through evaporation of solvents and oxidative polymerization
Specific weight
1,580 gr / ml
Volume of solids
58%
Voc
380 gr/liter
Minimum thickness
50 – 60 micron
Estimated yield
9 m² / litre for a thickness of 50 microns
Flash point
Component A 40° C
Thinner 34° C
Thinner 34° C
Temperature resistance
80° C continuously, 120° C discontinuously
Preparation of surfaces
New wood:
Sand to remove dirt and various contaminants.
Old paints:
Sanding or washing to remove greases or dirt
Sand to remove dirt and various contaminants.
Old paints:
Sanding or washing to remove greases or dirt
Preparation of the product
Mix the product before the use and add the thinner:
Component A 100
Thinner Synthetic thinner 5 - 10 % depending on the thickness of the dry film
Component A 100
Thinner Synthetic thinner 5 - 10 % depending on the thickness of the dry film
Environmental conditions
Ambient temperature: from + 5 to 40° C
Temperature of the support: > 10° C
Humidity: 0 - 80 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Temperature of the support: > 10° C
Humidity: 0 - 80 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Drying and hardening time
For the thickness of 80 microns
10° C 20° C 30° C
Dry to touch (hours) 4 1 0,5 hours
Dry in depth 16 8 4 hours
10° C 20° C 30° C
Dry to touch (hours) 4 1 0,5 hours
Dry in depth 16 8 4 hours
Time of overpainting
Minimum (hours) 10° C 20° C 30° C
16 8 4 hours
Maximum unlimited in the absence of contaminants
16 8 4 hours
Maximum unlimited in the absence of contaminants
Application
Brush or spray
Shelf life
2 years in a cool and dry place (max 40° C)
Packs
Lt. 2,5 Lt. 0,500