Code
0402
Description
Primer filler based on modified glycerophthalic resins
Use
This product is used as a primer coat on wood before applying synthetic enamels or as an intermediate paint on primed metal surfaces.
Appearance of the film
Matt
Color
White
Component
1
Hardening
Physical hardening through evaporation of solvents and oxidative polymerization.
Specific weight
1,580 gr / ml
Volume of solids
58%
VOC
380 gr/ liter
Minimum thickness
50 – 60 micron
Estimated yield
9 m² / litre for a thickness of 50 microns.
Flash point
Component A 40° C
Thinner 34° C
Thinner 34° C
Temperature resistance
80° C continuously, 120° C discontinuously
Preparation of surfaces
New wood:
Sand to remove dirt and various contaminants.
Old paints:
Sanding or washing to remove greases or dirt
Sand to remove dirt and various contaminants.
Old paints:
Sanding or washing to remove greases or dirt
Preparation of the product
Mix the product before the use and add the thinner:
Component A 100
Thinner Synthetic thinner 5 - 10 % depending on the thickness of the dry film
Component A 100
Thinner Synthetic thinner 5 - 10 % depending on the thickness of the dry film
Environmental conditions
Temperatura da: + 5 a 40°C
Temperatura supporto: > di 10°C
Umidità: 0 – 80%
Per prevenire la formazione di condensa è necessario che la temperatura del supporto sia almeno di 3°C superiore al punto di rugiada.
Temperatura supporto: > di 10°C
Umidità: 0 – 80%
Per prevenire la formazione di condensa è necessario che la temperatura del supporto sia almeno di 3°C superiore al punto di rugiada.
Tempi di indurimento
Ambient temperature: from + 5 to 40° C
Temperature of the support: > 10° C
Humidity: 0 - 80 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Temperature of the support: > 10° C
Humidity: 0 - 80 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Drying and hardening time
Minimum (hours): 10°C - 12 hours; 20°C - 8 hours; 30°C - 6 hours
Maximum: unlimited in the absence of contaminants
Maximum: unlimited in the absence of contaminants
Application
Brush or spray
Shelf life
2 years in a cool and dry place (max 40° C)
Packs
Comp A: Lt. 2,5 Lt. 0,500