Paint based on acrylic resins modified in odourless solvents
Use
This product is suitable for walls and ceilings polluted by smoke and nicotine stains. It has good adhesion on slightly powder substrates
Appearance of the film
Matt
Color
White
Component
1
Hardening
Physical hardening through evaporation of solvents
Specific weight
1,500 gr/ml
Volume of solids
38 %
VOC
490 gr/ liter
Minimum thickness
7,5 m² / litre for a thickness of 50 microns
Flash point
Component A 34° C Thinner 34° C
Temperature resistance
Max 110° C continuously 200° C discontinuously
Preparazione delle superfici
Lavare le superfici inquinate con idonei sgrassanti, asportare parti in fase di distacco. Applicare minimo due mani intervallate di 16 – 24 ore
Preparation of surfaces
Wash polluted surfaces with suitable degreasing products, remove all parts that are peeling off. Apply at least two coats alternated with 16 - 24 hours.
Environmental conditions
Ambient temperature: from + 5 to 40° C Temperature of the support: > 10° C Humidity: 0 - 85 % In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point
Drying and hardening time
For the thickness of 60 microns 10° C 20° C 30° C Dry to touch 6 3 2 hours Dry in depth 48 24 10 hours
Time of overpainting
Minimum (hours) 10° C 20° C 30° C 24 12 6 hours Maximum unlimited in the absence of contaminants
Application
Brush, roller, spray If you use the brush, you have to use nylon or natural bristle brushes. If you use the roller, you have to use medium - haired rollers. For the application, it is necessary to use the method of crossing coats.