DELUX CASA EXTRA
Water-based acrylic finish
Highly washable
Resistant to bad weather
Code
0805
Description
DELUX CASA EXTRA is based on high concentration acrylic resins. Its film has a semi-matt and soft look, which reflect the light uniformely so to give brightness to the place. Fast drying, rsistant to cleaning, anti mold. Thanks to its features it is suitable for all types of wall inside and outside.
Use
The product can be applied on suitably prepared concrete wall surfaces, where a good aesthetic appearance, as well as excellent resistance to washing with detergents, is required.
Film appearance
Matt
Colour
White and colour chart
Hardening
Physical by evaporation of water and coalescence of the polymer
Specific Weight
From 1,480 gr/m
Solids volume
43 %
VOC
40 gr/ L
Minimum thickness
50 -60 microns
Yield
8,6 mq / L for a thickness of 50 microns dry.
Fire point
Component A > 114°C
Temperature resistance
Max 60°C
Washability
> 15000 hits
Preparation of the surfaces
New surfaces:
Prime with acrylic insulation. In case of surfaces with high alkalinity (lime or new ready-mixed plasters) use a universal neutralizing insulator, based on alkali resistant resins.
The same treatment is advisable in case of surfaces previously treated with lime or chalking.
Prime with acrylic insulation. In case of surfaces with high alkalinity (lime or new ready-mixed plasters) use a universal neutralizing insulator, based on alkali resistant resins.
The same treatment is advisable in case of surfaces previously treated with lime or chalking.
Preparation of the product
Mix the product before use and add water
Component A 100
Water max 40%
Component A 100
Water max 40%
Environmental conditions
Ambient temperature: from + 5 to 40°C
Temperature of the surface: > 10°C
Humidity: 0 – 85 %
To prevent the formation of condensation the temperature of the surface
must be at least 3°C higher than the dew point
Temperature of the surface: > 10°C
Humidity: 0 – 85 %
To prevent the formation of condensation the temperature of the surface
must be at least 3°C higher than the dew point
Drying and hardening
For thicknesses of 50 microns 10°C 20°C 30°C
Dry to touch 3 1 0,5 hrs
Dry in depth 8 4 -5 2
Dry to touch 3 1 0,5 hrs
Dry in depth 8 4 -5 2
Overpainting
Minimum (hrs) 10°C 20°C 30°C
8 4 3
8 4 3
Application
Brush, roller spray
For brush applications use nylon or pure bristle brushes.
For roller applications use medium bristle rollers.
For its application use the method of the crossed hands.
For brush applications use nylon or pure bristle brushes.
For roller applications use medium bristle rollers.
For its application use the method of the crossed hands.
Shelf life
2 years in a cool and dry place (max. 40ºC)
Packaging
Comp A Lt. 14 Lt. 5 Lt. 2,5