DELUX CASA NORMALE
Water-based paint for walls
Excellent washability
For internal and external use
Code
0806
Description
Water-based paint based on vinyl versatatic copolymers and precious pigments resistant to color change over time. It gives the surface a fine, velvety aesthetic effect. It is easy to apply as it has good dilatation and excellent washability. The colours in the colour chart are soft, warm and relaxing. If applied on internal walls, they give brightness to the entire home
Use
The product can be used on concrete walls where a good aesthetic appearance, as well as excellent resistance to washing with detergents, is required.
Appearance of the film
matt
Colour
White and colour chart
Componenti
1
Hardening
Physical by evaporation of water and coalescence of the polymer.
Specific weight
from 1,430 gr/ml
VOC
40 gr/ liter
Estimated yield
8 – 9 mq /L
Flash point
Component A > 114°C
Temperature resistance
Max 60°C
Washability
> 10000 touches
Preparation of surfaces
New surfaces:
Prime with acrylic insulation. In case of surfaces with high alkalinity (lime or new ready-mixed plasters) use a universal neutralizing insulator, based on alkali-resistant resins.
The same treatment is advisable in case of surfaces previously treated with lime or chalking
Prime with acrylic insulation. In case of surfaces with high alkalinity (lime or new ready-mixed plasters) use a universal neutralizing insulator, based on alkali-resistant resins.
The same treatment is advisable in case of surfaces previously treated with lime or chalking
Preparation of the product
Mix the product before use and add water
Component A 100
Water max 40%
Component A 100
Water max 40%
Environmental conditions
Ambient temperature: from + 5 to 40°C
Temperature of the surface: > 10°C
Humidity: 0 – 85 %
To prevent the formation of condensation the temperature of the surface
must be at least 3°C higher than the dew point
Temperature of the surface: > 10°C
Humidity: 0 – 85 %
To prevent the formation of condensation the temperature of the surface
must be at least 3°C higher than the dew point
Drying and hardening time
For thicknesses of 50 microns 10°C 20°C 30°C
Dry to touch 3 1 0,5 hrs
Dey in depth 8 4 -5 2
Dry to touch 3 1 0,5 hrs
Dey in depth 8 4 -5 2
Time of overpainting
Minimum (hours) 10°C 20°C 30°C
8 4 3
Maximum Unlimited, except for the presence of contaminants on the
surface
8 4 3
Maximum Unlimited, except for the presence of contaminants on the
surface
Application
Brush, roller spray
For brush applications use nylon or pure bristle brushes.
For roller applications use medium bristle rollers.
For its application use the method of the crossed hands.
For brush applications use nylon or pure bristle brushes.
For roller applications use medium bristle rollers.
For its application use the method of the crossed hands.
Shelf life
2 years in a cool and dry place (max 40°C)
Packs
Comp A