ELASTOPOLIVER

Code

1213

Description

Highly reflective, non-yellowing aliphatic polyurethane polyurethane finish characterized by high surface hardness and excellent abrasion resistance, perfect adhesion to the substrate, high flexibility, excellent resistance to washing with alkaline acid solutions and excellent resistance to water, oils, grease, gasoline, alcohol and stains in general. POLIVER is applicable on metal surfaces.

Use

As a finish to improve appearance and strengths in highly aggressive environments such as heavy industrial and marine. As a finish for concrete floors subjected to foot traffic or rubber carts.
Suitable for painting swimming pools and tanks containing non-potable water. Excellent resistance to abrasion.
Can be applied directly over primers and intermediates such as: Epofond, Epofond zinc, Epo primer ,Epo surface

Appearance of the film

Brilliant

Colors

White, ral colors

Components

2

Hardening

Chemical reaction between two components

Specific weight

1,180 - 1,260 gr/ml (A + B)

Volume of solids

55%

Estimated yield

13,7 mq / litro per uno spessore di 40 micron secchi

Flash point

Componente A           34°C
Componente B           27°C
Diluente                      27°C

Minimum thickness

40 micron

Brilliance

> 90 gloss

Temperature resistance

120°C continually, 250 °C discontinuously

Chemical resistances

Water: Excellent
Dilute acids: Good
Saline solutions: Excellent
Dilute alkali: Good

Preparation of surfaces

Surfaces primed with primers, intermediates, epoxy finishes, free of contaminants

Preparation of the product

Mix component A before use, add component B and mix
Component A                100
Component B                  20
Thinner

Induction time

Not expected

Pot life

8 hours a 20°C

Dilution

Polyurethane Thinner
For roller application: 10%
For airless application max 5%
For spray application: 10- 20 %.

Environmental conditions

Ambient temperature:    da + 5  a 40°C
Temperature of the suppor:   > di 5°C
Humidity:                         0 – 70 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.

Drying and hardening time

Per spessori di 40 micron                      10°C           20°C           30°C
Dry to touch                                             8                 4                   2    ore
Dry in depth                                           24               12                  8

Times for overpainting

Minimum  (hours)                                         10°C          20°C            30°C
                                                                     24              12                   6
Maximum                                                     1 months

Application

Brush, roller,airless
For brush applications use nylon or pure bristle brushes.
For roller applications use medium-haired rollers.
For application use the cross-hands method.
Nozzle diameter: 0.33 (0.013 inch)
Air pressure: 180 atm

Shelf life

2 years in a cool and dry place (max 40° C)

Packs

12 kg = A 10 kg - B 2 Kg
6 kg = A 5 Kg - B 1 Kg