FULL 2000
Water – dilutable matt paint
Good breathability
It is suitable for internal spaces
Code
0812
Description
Water paint based on vinylversatic resin; it is breathable and it has a good coverage.
Use
It can be applied on old and new plasters, concrete surfaces, gypsum and plasterboard, old paints, and so on. « FULL 2000 » has a good high flexibility in application, coverage and resistance to the dry abrasion.
Appearance of the film
matt
colour
white
Component
1
Hardening
Physical hardening through evaporation of water and union of the polymer
Specific weight
From 1,700 gr/ml
VOC
30 gr/ litre
Estimated yield
8 – 9 m² / litre for the smooth supports with medium absorption
Flash point
Component A > 114° C
Preparation of surfaces
New surfaces:
Make sure that the supports are completely dry. If there are molds, treat the surface with suitable products.
Remove possible efflorescence and paints that are peeling off with brushes and washes.
Prime the surface with an acrylic fixative product.
Old surfaces:
Remove old paints that are peeling off. Tempera and lime paintings must be removed with brushes and washes.
Make sure that the supports are completely dry. If there are molds, treat the surface with suitable products.
Remove possible efflorescence and paints that are peeling off with brushes and washes.
Prime the surface with an acrylic fixative product.
Old surfaces:
Remove old paints that are peeling off. Tempera and lime paintings must be removed with brushes and washes.
Preparation of the product
Mix the product before the use and add water:
Component A 100
Water max 25 - 30 % (first coat)
max 10 - 15 % (second coat)
Component A 100
Water max 25 - 30 % (first coat)
max 10 - 15 % (second coat)
Environmental conditions
Ambient temperature: from + 8 to 40° C
Temperature of the support: > 10° C
Humidity: 0 – 80 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Temperature of the support: > 10° C
Humidity: 0 – 80 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Drying and hardening time
For the thickness of 50 microns 10° C 20° C 30° C
Dry to touch 3 1 0,5 hours
Dry in depth 8 4 -5 2 hours
Dry to touch 3 1 0,5 hours
Dry in depth 8 4 -5 2 hours
Time of overpainting
Minimum (hours) 10° C 20° C 30° C
8 4 3 hours
Maximum unlimited in the absence of contaminants
8 4 3 hours
Maximum unlimited in the absence of contaminants
Application
Brush, roller
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium-haired rollers.
For the application, it is necessary to use the method of crossing coats.
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium-haired rollers.
For the application, it is necessary to use the method of crossing coats.
Shelf life
2 years in a cool and dry place (max 40° C)
Packs
Comp A: Lt. 14; Lt. 4; Lt. 2,5