Code
0901
Description
Plastic coating based on acrylic resins and siliceous aggregates, with excellent masking power of the substrate imperfections.
Use
This product can be applied on old and new plasters based on hydraulic binders, on concrete, on old organic and mineral paints, provided they are absorbent and united.
Appearance of the film
Matt
Color
White or color chart
Component
1
Hardening
Physical hardening through evaporation of water and union of the polymer
Specific weight
Da 1,95 gr/ml
VOC
5 gr/ liter
Estimated yield
1,5 – 2,5 kg / mq
Flash point
Component A > 114°C
Preparation of surfaces
New surfaces:
Dry and mature. Remove any efflorescence by brushing or washing.
Old surfaces:
Remove dust and old paints that are peeling off, widen any cracks and fill them with a filler. Completely eliminate old lime or tempera paints.
In the presence of molds, provide for an appropriate anti - mold treatment.
Prime surfaces with a fixative such as « SOTTOFONDO ».
Dry and mature. Remove any efflorescence by brushing or washing.
Old surfaces:
Remove dust and old paints that are peeling off, widen any cracks and fill them with a filler. Completely eliminate old lime or tempera paints.
In the presence of molds, provide for an appropriate anti - mold treatment.
Prime surfaces with a fixative such as « SOTTOFONDO ».
Preparation of the product
Mix the product before the use.
Component A 100
Component A 100
Environmental conditions
Ambient temperature: from + 8 to 40° C
Temperature of the support: > 5° C
Humidity: 0 - 75 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Temperature of the support: > 5° C
Humidity: 0 - 75 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Precautions:
Do not apply in the presence of surface condensation or under direct sunlight.
The humidity of the substrate must be less than 10 %.
Protect from the rain for at least 48 hours.
The humidity of the substrate must be less than 10 %.
Protect from the rain for at least 48 hours.
Drying and hardening times
At 25° C for 1 - 2 hours depending on the thickness applied.
Overpainting
After 5 - 6 hours
Application
Spatula
Shelf life
1 year in a cool and dry place (max 40° C)
Packs
Comp A Kg. 24