H 95 IMPRIMITURA
High penetrating and consolidating power
For external and internal painting cycles
Code
0636
Description
Water - based, solvent - free primer made of micronized acrylic resins in aqueous solution with high penetration for the consolidation of internal and external surfaces. Due to its characteristics HK 595, it is a valid alternative to the use of solvent - based fixative products. HK 595 can be also used as anti - dust for concrete floors.
Use
This product is used as a support for anchoring next layers of paint on new or old plasters, on concrete, plaster and plasterboard surfaces. It is also suitable for many kinds of building materials, provided they are absorbent, on old compact and well adherent paints.
Appearance of the film
Opalescent
Color
Transparent
Component
1
Hardening
Physical hardening through evaporation and union of the polymer
Specific weight
1,01 gr/ml DIN ISO 2811-1
VOC
5 gr/ litre
Minimum thickness
5 – 10 micron
Estimated yield
8 - 10 m² / litre on very absorbent substrates. 15 - 18 m² / litre on substrates such as plaster, plasterboard and traditional plasters.
Preparation of surfaces
Make sure that the substrate is well dry; with a brush, remove any efflorescence, parts of old paints that are peeling off. Completely remove high layers of lime or tempera paints.
Inside level any irregularities, close the holes with « RESINSTUCK » (paste product) or « RESINSTUCCO » (powder product) and sand. Outside perform any shaving operations with our bonding coat plaster R17.
Inside level any irregularities, close the holes with « RESINSTUCK » (paste product) or « RESINSTUCCO » (powder product) and sand. Outside perform any shaving operations with our bonding coat plaster R17.
Preparation of the product
Component A 100
Dilute with water depending on the absorption of the substrate; however, perform the following ratio: 1 litre of HK 595 with 1 litre of water for old or damaged substrates. 1 litre of H595 with 2 litres of water for new substrates.
Dilute with water depending on the absorption of the substrate; however, perform the following ratio: 1 litre of HK 595 with 1 litre of water for old or damaged substrates. 1 litre of H595 with 2 litres of water for new substrates.
Environmental conditions
Ambient temperature: from + 5 to 40° C
Temperature of the support: > 5° C
Humidity: 0 - 75 %
Avoid applications in the presence of surface condensation or under direct sunlight.
Temperature of the support: > 5° C
Humidity: 0 - 75 %
Avoid applications in the presence of surface condensation or under direct sunlight.
Drying and hardening time
At 25° C and 65 % UR
Dry to touch 35 - 45 minutes
Dry to touch 35 - 45 minutes
Overpainting
4 – 5 hours
Application
Brush, roller
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
Shelf life
2 years in a cool and dry place (max 40° C)
Packs
Comp A Lt. 20 Lt. 5 Lt. 1