IDROCOLORE
Water - based wall paint
Good washability
It is suitable for internal and external spaces
Code
0811
Description
Based on vinylversatic resins and opaque pigments, « IDROCOLORE » is a washable water - paint indicated for both internal and external applications. It has a good consistency and it is easy to apply.
Use
This product can be applied on wall surfaces, properly prepared with concrete, where a good aesthetic appearance and an excellent resistance to washing with cleansing products are required.
Appearance of the film
Matt
Color
White
Component
1
Hardening
Physical hardening through evaporation of water and union of the polymer
Specific weight
From 1,550 gr/ml
VOC
40 gr/ liter
Estimated yield
8 - 9 m² / liter for coat
Flash point
Component A > 114°C
Temperature resistance
Max 60°C
Washability
> 6000 touches
Preparation of surfaces
New surfaces:
Prime with an acrylic insulating product. In the presence of surfaces with high alcalinity (new or lime plasters based on premixed mortar), use a universal neutralizing insulating product, based on alkali resistant resins.
The same treatment is recommended for surfaces previously treated with lime or powder materials.
Prime with an acrylic insulating product. In the presence of surfaces with high alcalinity (new or lime plasters based on premixed mortar), use a universal neutralizing insulating product, based on alkali resistant resins.
The same treatment is recommended for surfaces previously treated with lime or powder materials.
Preparation of the product
Mix the product before the use and add water
Component A 100
Water 1° coat 20 - 25 % / 2° coat 10 - 15 %
Component A 100
Water 1° coat 20 - 25 % / 2° coat 10 - 15 %
Environmental conditions
Ambient temperature: from + 5 to 40° C
Temperature of the support: > 10° C
Humidity: 0 - 85 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Temperature of the support: > 10° C
Humidity: 0 - 85 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Drying and hardening time
For the thickness of 50 microns 10° C 20° C 30° C
Dry to touch 3 1 0,5 hours
Dry in depth 8 4 - 5 2 hours
Dry to touch 3 1 0,5 hours
Dry in depth 8 4 - 5 2 hours
Time of overpainting
Minimum (hours) 10° C 20° C 30° C
8 4 3 hours
Maximum unlimited in the absence of contaminants
8 4 3 hours
Maximum unlimited in the absence of contaminants
Application
Brush, roller
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
Shelf life
2 years in a cool and dry place (max 40° C)
Packs
Comp A Lt. 14 Lt. 5 Lt. 2,5