Code
0810
Description
Breathable water-repellent water-based paint based on an emulsion of synthetic copolymers and water-repellent pigments. Idrolux is a paint formulated to guarantee good qualities of permeability to water vapor and to allow an excellent transpiration of the walls. It also has good qualities of water repellency, high coverage, easy brushing, excellent expansion
Use
It can be applied on old and new plasters, concrete, plaster and plasterboard, old paints etc. With good brushing, coverage, and dry abrasion resistance.
Appearance of the film
matt
Colour
White
Componenti
1
Hardening
Physical by evaporation of water and coalescence of the polymer.
Specific weight
From 1, 620 gr/ml
VOC
30 gr/ liter
Estimated yield
8 – 9 m²/ L for smooth medium absorption substrates
Flash point
Component A > 114°C
Preparation of surfaces
New surfaces:
Make sure the surfaces are dry. In case of mould, treat the surface with suitable restorers.
Eliminate any efflorescence and paints that are peeling off by brushing and washing.
Prime with an acrylic fixative.
Old paints:
Eliminate old paints that are peeling off. Paints based on tempera and lime must be removed by brushing and washing.
Make sure the surfaces are dry. In case of mould, treat the surface with suitable restorers.
Eliminate any efflorescence and paints that are peeling off by brushing and washing.
Prime with an acrylic fixative.
Old paints:
Eliminate old paints that are peeling off. Paints based on tempera and lime must be removed by brushing and washing.
Preparation of the product
Mix the product before use and add water.
Component A 100
Water 30 – 40%
Component A 100
Water 30 – 40%
Environmental conditions
Ambient temperature: from + 5 to 40°C
Temperature of the surface: > 10°C
Humidity: 0 – 80 %
To prevent the formation of condensation the temperature of the surface
must be at least 3°C higher than the dew point
Temperature of the surface: > 10°C
Humidity: 0 – 80 %
To prevent the formation of condensation the temperature of the surface
must be at least 3°C higher than the dew point
Drying and hardening time
For thicknesses of 50 microns 10°C 20°C 30°C
Dry to touch 3 1 0,5 hours
Dry in depth 8 4 -5 2
Dry to touch 3 1 0,5 hours
Dry in depth 8 4 -5 2
Time of overpainting
Minimum (hours) 10°C 20°C 30°C
8 4 3
Maximum Unlimited, except for the presence of contaminants on the
surface.
8 4 3
Maximum Unlimited, except for the presence of contaminants on the
surface.
Application
Brush, roller.
For brush applications use nylon or pure bristle brushes.
For roller applications use medium pile rollers.
For the application use the method of the crossed hands
For brush applications use nylon or pure bristle brushes.
For roller applications use medium pile rollers.
For the application use the method of the crossed hands
Shelf life
2 years in a cool and dry place (max 40°C)
Packs
Comp A Lt. 14 Lt. 5 Lt. 2,5