ACRILSOL - IMPRIMITURA ACRILICA
Water - dilutable acrylic insulating product
Filler for wall substrates
For external and internal painting cycles
Code
0603
Description
Water - based filler made of acrylic resins in water solution with a high degree of saponification.
Use
This product is used as a support for anchoring next layers of paint on new or old plasters, on concrete, plaster and plasterboard surfaces. It is also suitable for many kinds of building materials, provided they are absorbent, on old compact and well adherent paints.
Appearance of the film
Translucent
Color
Transparent
Component
1
Hardening
Physical hardening through evaporation and union of the polymer
Specific weight
1,01 gr/ml
Volume of solids
26 %
VOC
5 gr/ liter
Minimum thickness
5 – 10 micron
Estimated yield
26 m² / litre for a thickness of 10 microns
Preparation of surfaces
Make sure that the substrate is well dry; with a brush, remove any efflorescence, all parts of old paints that are peeling off. Completely remove high layers of lime or tempera paints.
Level any irregularities, close the holes, sand.
Level any irregularities, close the holes, sand.
Preparation of the product
Component A 100
Dilute with water depending on the absorption of the substrate; however, perform the following ratio: 1 litre of « IMPRIMITURA ACRILICA » with 4 - 5 litres of water.
Dilute with water depending on the absorption of the substrate; however, perform the following ratio: 1 litre of « IMPRIMITURA ACRILICA » with 4 - 5 litres of water.
Environmental conditions
Ambient temperature: from + 5 to 40° C
Temperature of the support: > 5° C
Humidity: 0 - 75 %
Avoid applications in the presence of surface condensation or under direct sunlight.
Temperature of the support: > 5° C
Humidity: 0 - 75 %
Avoid applications in the presence of surface condensation or under direct sunlight.
Drying and hardening times
At 25° C and 65 % UR
Dry to touch 35 - 45 minutes
Dry to touch 35 - 45 minutes
Overpainting
4 – 5 hours
Application
Brush, roller
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
Shelf life
2 years in a cool and dry place (max 40° C))
Packs
Comp A Lt. 20 Lt. 5 Lt. 1