LEGNO VIVO SINTETICO Lucido o Satinato
Glossy finish for wood
It is suitable for internal and external spaces
Elastic and resistant to the weather
Code
1102
Description
Modified long oil synthetic resin for substrate based on wood.
Use
This product is used for new wood surfaces and on old substrates, previously painted, such as: match - boarding, shutters, fences, attics, and so on.
Appearance of the film
Glossy and matt flatting
Color
Transparent
Component
1
Hardening
Physical hardening through evaporation of the solvent and oxidative polymerization
Specific weight
0,920 gr / ml
Volume of solids
44 %
VOC
400 gr/ liter
Estimated yield
7 m² / litre for a thickness of 60 microns (2 coats)
Flash point
34°C
Preparation of surfaces
New or carried forward surfaces:
Sand in order to remove the raised wood fibers, any traces of resin must be removed with the use of a nitro thinner. Fill any imperfections, sand and remove dust.
Give a first coat of colored filler.
After dying, sand and give a coat of « LEGNO VIVO SINTETICO » for interior applications, two coats for exterior applications.
Already painted surfaces:
Remove old layers of paints that are peeling off and roughen the surface.
Sand any fillings and remove dust. Apply the primer as indicated above.
Sand in order to remove the raised wood fibers, any traces of resin must be removed with the use of a nitro thinner. Fill any imperfections, sand and remove dust.
Give a first coat of colored filler.
After dying, sand and give a coat of « LEGNO VIVO SINTETICO » for interior applications, two coats for exterior applications.
Already painted surfaces:
Remove old layers of paints that are peeling off and roughen the surface.
Sand any fillings and remove dust. Apply the primer as indicated above.
Preparation of the product
Mix the product before the use
Component A 100
Synthetic thinner 0 - 5 %
Component A 100
Synthetic thinner 0 - 5 %
Environmental conditions
Ambient temperature: from + 8 to 35° C
Temperature of the support: > 5° C
Humidity: 0 - 80 %
Humidity of the support: < 10 %
Temperature of the support: > 5° C
Humidity: 0 - 80 %
Humidity of the support: < 10 %
Drying and hardening times
For the thickness of 60 microns (wet) 10° C 20° C 30° C
Dry to touch 6 3 1 hours
Dry in depth 18 10 6 hours
Dry to touch 6 3 1 hours
Dry in depth 18 10 6 hours
Time of overpainting
Minimum (hours) 10° C 20° C 30° C
18 10 6 hours
18 10 6 hours
Application
Brush, roller, spray
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
Shelf life
2 years in a cool and dry place (max 40° C)
Packs
Comp A Lt. 4 Lt. 1