LUXURY
Glossy textured finish based on water
High washability
It is suitable for internal and external spaces
Code
0905
Description
Paint based on vynilversatic copolymers in aqueous dispersion. It is suitable for the rooms of hospitals, schools, and for all environments where a high standard of cleanliness is required.
Use
This product can be applied to old and new plasters based on hydraulic binders, concrete, plaster and plasterboard surfaces. It is also used on old organic or inorganic paints, provided they are well adherent.
Avoid the application on wet or alkaline substrates.
Avoid the application on wet or alkaline substrates.
Appearance of the film
Glossy
Color
White and color chart
Component
1
Hardening
Physical hardening through evaporation of water and union of the polymer
Specific weight
Da 1,170 gr/m
Volume of solids
43 %
VOC
71,53 gr/ liter
Minimum thickness
100 micron
Estimated yield
4,3 m² / litre for a thickness of 100 microns
Flash point
Component A > 114°C
Preparation of surfaces
New surfaces:
Prime with an acrylic insulating product; in the presence of surfaces with high alkalinity (lime plasters), use a universal neutralizing insulating product, based on resistant alkali resins.
In the presence of lime or tempera paints, remove them entirely from the surface by washing or by the abrasion.
In the presence of mold, provide an adequate anti - mold treatment with suitable products.
Prime with an acrylic insulating product; in the presence of surfaces with high alkalinity (lime plasters), use a universal neutralizing insulating product, based on resistant alkali resins.
In the presence of lime or tempera paints, remove them entirely from the surface by washing or by the abrasion.
In the presence of mold, provide an adequate anti - mold treatment with suitable products.
Preparation of the product
Mix the product before the use
Component A 100
Water max 5 % to reduce the textured effect
Component A 100
Water max 5 % to reduce the textured effect
Environmental conditions
Ambient temperature: from + 5 to 40° C
Temperature of the support: > 10° C
Humidity: 0 - 75 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point
Temperature of the support: > 10° C
Humidity: 0 - 75 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point
Drying and hardening time
At 25° C and 65 % of humidity 1 - 2 hours
Time of overpainting
6 hours
Application
Roller, brush only for small touches.
For the roller application, use medium - grained sponge rollers.
For the roller application, use medium - grained sponge rollers.
Shelf life
2 years in a cool and dry place (max 40° C)
Packs
Comp A Lt. 14; Lt. 5; Lt. 2,5.