Description
Water - based matt transparent finish, based on special photoluminescent pigments that absorb natural or artificial light from the environment and release it slowly in dark or semi - shade conditions by lighting up on their own. The duration of photoluminescence can last from 6 to 8 hours depending on the light absorbed.
Use
This product is applied to any kind of paints after proper preparation. It is advisable to apply « MAGICHE STELLINE » on white substrates or with light colors in order to not alter the color. Dark colored substrates may vary slightly in color. The clearer the substrate will be, the brighter the light released from « MAGICHE STELLINE » in the dark.
Appearance of the film
Matt
Color
Transparent
Component
1
Hardening
Physical hardening through evaporation of water and union of the polymer
Specific weight
Da 1,00 gr/lt
VOC
40 gr/ liter
Minimum thickness
40 micron
Estimated yield
4 – 5 mq/kg
Flash point
Component A > 114°C
Temperature Resistance
Max 60°C
washability
> 15000 touches
Preparation of surfaces
New surfaces: apply a coat of our acrylic insulating product « IMPRIMITURA ACRILICA » diluted with water in a ratio of 1 to 5 (mix each litre of « IMPRIMITURA ACRILICA » with 5 litres of water).
Old surfaces: remove all parts that are peeling off, and after a careful cleaning, apply one coat of our acrylic insulating product « IMPRIMITURA ACRILICA » diluted with water in a ratio of 1 to 5 (mix each litre of « IMPRIMITURA ACRILICA » with 5 litres of water).
Old surfaces: remove all parts that are peeling off, and after a careful cleaning, apply one coat of our acrylic insulating product « IMPRIMITURA ACRILICA » diluted with water in a ratio of 1 to 5 (mix each litre of « IMPRIMITURA ACRILICA » with 5 litres of water).
Preparation of the product
Product ready to use. Mix the product well before the use
Component A 100
Component A 100
Environmental conditions
Ambient temperature: from + 5 to 40° C
Temperature of the support: > 10° C
Humidity: 0 - 85 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Temperature of the support: > 10° C
Humidity: 0 - 85 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Drying and hardening time
For the thickness of 50 microns 10° C 20° C 30° C
Dry to touch 3 1 0,5 hours
Dry in depth 8 4 - 5 2 hours
Dry to touch 3 1 0,5 hours
Dry in depth 8 4 - 5 2 hours
Time of overpainting
Minimum (hours) 10° C 20° C 30° C
8 4 3 hours
Maximum unlimited in the absence of contaminants
8 4 3 hours
Maximum unlimited in the absence of contaminants
Application
After a suitable preparation of the substrate, apply the product as follows: apply a coat of our white or any other color primer « SABBIAFOND » with a brush or a roller diluted to 20 - 25 % with water.
When the substrate is well dry, apply one coat of « MAGICHE STELLINE », undiluted, with the appropriate brush, roller or plug, making circular or crossed movements, avoiding painting the same position in the same way, or in an accidental way. « SOFT » can be applied on any type of water - based paint.
When the substrate is well dry, apply one coat of « MAGICHE STELLINE », undiluted, with the appropriate brush, roller or plug, making circular or crossed movements, avoiding painting the same position in the same way, or in an accidental way. « SOFT » can be applied on any type of water - based paint.
Shelf life
2 years in a cool and dry place (max 40° C)
Packs
Comp A Kg. 5 – Kg. 2