MURALCOLOR
Water - repellent product based on water
Excellent penetration
Breathable product without film
Code
0607
Description
Acryl - siloxane solution in water, resistant to alkali and to the weather.
Use
This product is suitable as a water - repellent for various mineral substrates; it has an excellent penetration, reduces water absorption and preserves the original appearance of the substrate (without film).
It can be applied on concrete surfaces, reinforced concrete, stones, plasters and brick infills.
It is not recommended on old paints and on substrates that are not absorbent, such as polished marble, granite and plaster.
It can be applied on concrete surfaces, reinforced concrete, stones, plasters and brick infills.
It is not recommended on old paints and on substrates that are not absorbent, such as polished marble, granite and plaster.
Appearance of the film
Milky liquid
Component
1
Hardening
Evaporation of water
Specific weight
1,050 gr / ml
Estimated yield
Depending on the absorption of the substrate from 0,25 to 1 litre / m²
flash point
Not inflammable
Preparation of surfaces
Normally only a dust removal is provided for; in the case of surfaces with scaling or stubborn dirt, proceed with a power wash.
In the presence of molds, perform an appropriate anti - mold treatment.
In the presence of molds, perform an appropriate anti - mold treatment.
Environmental conditions
Ambient temperature: from + 8 to 35° C
Temperature of the support: > 5° C
Humidity: 0 - 75 %
Temperature of the support: > 5° C
Humidity: 0 - 75 %
Drying and hardening time
At 20° C and 65 % UR
About 24 hours to carry out water - repellent action
About 24 hours to carry out water - repellent action
Packs
Comp. A Lt. 20 Lt. 5 Lt. 1
Shelf life
2 years in a cool and dry place (max 40° C)