MUROVIVO FREE
Water - soluble anti - mould paint
Anti - condensation effect
Formaldehyde - free
Description
Paint based on vinylversatic resin modified with hollow glass spheres, which ensures good thermal insulation and an excellent anti - condensation barrier effect. It is enriched by the addition of anti - mould and anti - algae agents that are completely harmless to humans, but which prevent the formation of bacteria and preserve the wall for a very long time from the formation of mould and algae. « MUROVIVO » is a formaldehyde - free paint.
Use
This paint is suitable for the protection of wall surfaces in humid or condensed environments such as: bathrooms, kitchens, cellars, laundries, and so on.
It can be applied to old and new plaster, concrete, plaster and plasterboard surfaces, old paints provided they adhere well.
It can be applied to old and new plaster, concrete, plaster and plasterboard surfaces, old paints provided they adhere well.
Appearance of the film
Matt
Color
White and color chart
Components
1
Hardening
Physical hardening through evaporation of water and union of the polymer
Specific weight
0,900 gr / ml
VOC
12 gr / litre
Estimated yield
6 m² / litre for smooth and medium - absorbent substrates
Flash point
> 114°C
Temperature resistance
Max 60°C
Preparation of surfaces
New surfaces:
New plasters or patches must be cured, clean, dry and free from white layer.
If mould is present, treat the surface as follows: apply a first coat of our « SD SPRAY » and dry the surface with a cloth, then apply a coat of our « SANIMUF » with a brush or a roller and leave it for a minimum of 24 hours and a maximum of 48 hours. Then proceed with the application of two coats of « MUROVIVO FREE ». Remove any efflorescence by brushing or washing. Prime the cleaned surfaces with our acrylic fixative product « ACRILSOL ».
Already painted surfaces:
Remove paints that are peeling off; with tempera or lime - based paints, remove them completely by washing and brushing.
New plasters or patches must be cured, clean, dry and free from white layer.
If mould is present, treat the surface as follows: apply a first coat of our « SD SPRAY » and dry the surface with a cloth, then apply a coat of our « SANIMUF » with a brush or a roller and leave it for a minimum of 24 hours and a maximum of 48 hours. Then proceed with the application of two coats of « MUROVIVO FREE ». Remove any efflorescence by brushing or washing. Prime the cleaned surfaces with our acrylic fixative product « ACRILSOL ».
Already painted surfaces:
Remove paints that are peeling off; with tempera or lime - based paints, remove them completely by washing and brushing.
Preparation of the product
Mix the product before the use and add water
Component A 100
Water max 5 – 10 %
Component A 100
Water max 5 – 10 %
Environmental conditions
Ambient temperature: from + 8 to 40° C
Temperature of the support: > 10° C
Humidity: 0 - 80 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Temperature of the support: > 10° C
Humidity: 0 - 80 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Precautions:
• Do not apply on wet or not well cured substrates;
• Do not apply at temperature below 10° C;
• Do not apply when moisture is above 80 %
• Do not apply at temperature below 10° C;
• Do not apply when moisture is above 80 %
Drying and hardening time
For the thickness of 100 microns 10° C 20° C 30° C
Dry to touch 3 1 0,5 hours
Dry in depth 12 8 4 hours
Dry to touch 3 1 0,5 hours
Dry in depth 12 8 4 hours
Time of overpainting
Minimum (hours) 10° C 20° C 30° C
12 8 4 hours
Maximum unlimited in the absence of contaminants
12 8 4 hours
Maximum unlimited in the absence of contaminants
Application
Brush, roller
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
Shelf life
2 years in a cool and dry place (max 40° C)
Packs
Comp A Lt. 14 – Lt. 5 – Lt. 2,5