Code
0824
Description
Resin-based paint modified with hollow glass beads, to ensure a good thermal insulation and to avoid the formation of condensation.
Use
Suitable for the protection of wall surfaces in humid or condensed environments such as: bathrooms, kitchens, cellars, laundries, etc.
It can be applied on old and new plasters, on concrete, plaster and plasterboard surfaces and old paints as long as they are very tight.
It can be applied on old and new plasters, on concrete, plaster and plasterboard surfaces and old paints as long as they are very tight.
Appearance of the film
Matt
Color
White and colour chart
Component
1
Hardening
Physical by evaporation of water and coalescence of the polymer.
Specific weight
Da 0,900 gr/ml
VOC
12 gr/ liter
Estimated yield
6 m²/ L for smooth medium absorption surfaces
Flash point
Component A > 114°C
Preparation of surfaces
New surfaces:
New plasters must be seasoned, cleaned and dried.
In case of mould, treat the surface with suitable healing.
Remove any efflorescence by brushing or washing.
Prime clean surfaces with acrylic fixatives.
Already painted surfaces:
Remove the detaching parts. In case of tempera or lime based paints, provide for the total removal by washing and brushing.
New plasters must be seasoned, cleaned and dried.
In case of mould, treat the surface with suitable healing.
Remove any efflorescence by brushing or washing.
Prime clean surfaces with acrylic fixatives.
Already painted surfaces:
Remove the detaching parts. In case of tempera or lime based paints, provide for the total removal by washing and brushing.
Preparation of the product
Mix the product before use and add water
Component A 100
Water max. 5 – 10 %
Component A 100
Water max. 5 – 10 %
Environmental conditions
Ambient temperature: from + 8 to 40°C
Temperature of the surface: > 10°C
Humidity: 0 – 80 %
To prevent the formation of condensation, the temperature of the surface must be at least 3 ° C higher than the dew point.
Temperature of the surface: > 10°C
Humidity: 0 – 80 %
To prevent the formation of condensation, the temperature of the surface must be at least 3 ° C higher than the dew point.
Warnings:
Do not apply the product to wet or unseasoned surfaces
Do not apply the product at temperatures below 10 °c
Do not apply the product with specific humidity above 80%.
Do not apply the product at temperatures below 10 °c
Do not apply the product with specific humidity above 80%.
Drying and hardening times
For thicknesses of 100 microns 10°C 20°C 30°C
Dry to the touch 3 1 0,5 hrs
Dry in depth 12 8 4
Dry to the touch 3 1 0,5 hrs
Dry in depth 12 8 4
Time for overpainting
Minimum: (hrs) 10°C 20°C 30°C
12 8 4
Maximum: unlimited, except for the presence of contaminants on the surface
12 8 4
Maximum: unlimited, except for the presence of contaminants on the surface
Application
Brush and paint roller
For brush applications use nylon or pure bristle brushes.
For roller applications use medium-hair rollers.
For the application use the method of the crossed hands
For brush applications use nylon or pure bristle brushes.
For roller applications use medium-hair rollers.
For the application use the method of the crossed hands
Shelf life
2 years in a cool and dry place (max 40 ° C)
Packs
Comp A