Finishing a synthetic resin modified with drying oils non-yellowing . How to use finish for exposed metal structures in rural environments , marine.
Aspect of the film:
brilliant
Colour
White and colors cartella
Component
1
Hardening
by evaporation of the solvents and oxidative polymerization .
Specific weight
1,180
volum of solids
51%
Voc
380 gr/litro
Minimum thickness
50 -60 micron
Estimated yield
8.5 mq / liter for a thickness of 60 microns dry
Flash point
34 ° C
Temperature Resistance
Max 100 ° C continuous , 140 ° C in a discontinuous
Preparation of surfaces
primed with anti-rust type : RESINFER , RESINCOR RE RESINZINC .
Preparation of the product
Mix the product before use and add the diluent Component A 100 Thinner 5-10 % depending on the thickness of the dry film applied.
Environmental conditions
Ambient temperature : + 5 to 40 ° C Substrate temperature : > 10 ° C Humidity : 0-85 % To prevent the formation of condensation is necessary that the temperature of the substrate is at least 3 ° C above the dew point
Drying and hardening time
thickness from 45 microns 10 ° C 20 ° C 30 Dry to the touch 4 2 1 hours Cured 24 12 6 hours
Minimum time for overcoating
10 ° C 20 ° C 30 24 12 6 hours Unlimited maximum in the absence of contaminants
Application
Brush , roller or spray . For brush application use brushes in nylon or bristle . For roller application , short-haired roller .