NUBILAC THERMO
Water-soluble enamel
Excellent washability and brilliance
Suitable for radiators and pipes
Code
0302
Description
Water-based acrylic enamel for radiators and pipes. The product is eco-friendly since it is free of harmful substances, is odourless, and it does not give off unpleasant smells when the heating is turned on.
Use
Specifically designed for painting radiators and hot water pipes.
Appearance of the film
Satin
Colour
White and colour chart
Component
1
Hardening
Physical by evaporation of water and coalescence of the polymer.
Specific weight
From 1,230 gr/m
Volume of solids
38,8 %
VOC
48 gr/ liter
Minimum thickness
50 -60 micron
Estimated yield
6,4 m² / L for a thickness of 50 microns dry
Flash point
Component A > 114°
Temperature resistance
MAX 60° C
Preparation of surfaces
New surfaces:
Prime with acrylic insulator. In case of surfaces with high alkalinity (lime plasters) use a universal neutralizing insulator, based on alkali-resistant resins. The same treatment is advisable in case of surfaces previously treated with lime or chalking.
Metal surfaces: prime with our UNDER water based rust inhibitor
Prime with acrylic insulator. In case of surfaces with high alkalinity (lime plasters) use a universal neutralizing insulator, based on alkali-resistant resins. The same treatment is advisable in case of surfaces previously treated with lime or chalking.
Metal surfaces: prime with our UNDER water based rust inhibitor
Preparation of the product
Mix the product before use and add water
Component A 100
water max 20%
Component A 100
water max 20%
Environmental conditions
Ambient temperature: from + 5 to 40°C
Temperature of the surface: > 10°C
Humidity: 0 – 85 %
To prevent the formation of condensation the temperature of the surface
must be at least 3°C higher than the dew point.
Temperature of the surface: > 10°C
Humidity: 0 – 85 %
To prevent the formation of condensation the temperature of the surface
must be at least 3°C higher than the dew point.
Drying and hardening time
For thicknesses of 50 microns 10°C 20°C 30°C
Dry to touch 3 1 0,5 hrs
Dry in depth 8 4 -5 2
Dry to touch 3 1 0,5 hrs
Dry in depth 8 4 -5 2
Time of overpainting
Minimum (hours) 10°C 20°C 30°C
8 4 3
Maximum Unlimited, except for the presence of contaminants on the
surface
8 4 3
Maximum Unlimited, except for the presence of contaminants on the
surface
Application
Brush, roller spray
For brush applications use nylon or pure bristle brushes.
For roller applications use medium pile rollers.
For the application use the method of the crossed hands.
For brush applications use nylon or pure bristle brushes.
For roller applications use medium pile rollers.
For the application use the method of the crossed hands.
Shelf life
2 years in a cool and dry place (max 40°C)
Packs
Comp A Lt. 2,5 Lt. 0,750