PITTURA PER COPERTA

Code

1007

Description

Finish based on glycerophtalic resins modified with no yellowing siccative oils which give to the product a high UV resistance, an excellent flexibility in application, the hardness of the surface and a high resistance to atmospheric agents and salts. When the product is completely dry, it provides a non - slip surface.

Use

This product is used as a finish for wooden and iron decks of tourist or work boats such as yachts, fishing boats, « gozzi » (Ligurian fishing boats), tug - boats and ships in general.

Appearance of the film

This product is used as a finish for wooden and iron decks of tourist or work boats such as yachts, fishing boats, « gozzi » (Ligurian fishing boats), tug - boats and ships in general.

Color

White - green - red - light blue

Component

1

Hardening

Physical hardening through evaporation of solvents and oxidative polymerization

Specific weight

1,000 – 1,140 g r/ ml

Volume of solids

51 %

VOC

380 gr/ liter

Minimum thickness

50 – 60 micron

Estimated yield

8.5 m² / litre for a thickness of 60 microns

Flash point

Component A 34°C
Thinner 34°C

Temperature resistance

Max 100° C continuously or 140° C discontinuously

Preparation of surfaces

Iron: make sure that the substrate is well clean, dry and degreased. Remove any rust stains and apply a coat of an anti - rust product such as « RESINFER », « RESINCOR R.E. », « RESINZINC » or « MINIOCROM ».
Wood: apply a coat of « MINIOCORM » and two coats of « PITTURA PER COPERTA ».

Preparation of the product

Mix the product before the use and add the thinner
Component A 100
Thinner 5 - 10 % according to the thickness of the dry film to be applied

Environmental conditions

Ambient temperature:            from + 5  to  40° C
Temperature of the support:   > 10° C
Humidity:                                0 - 85 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.

Drying and hardening time

For the thickness of 45 microns             10° C           20° C           30° C
Dry to touch                                            4                  2                 1     hours
Dry in depth                                          24                12               6      hours

Time of overpainting

Minimum  (hours)                                  10° C          20° C            30° C
                                                               24              12                  6   hours
Maximum    unlimited in the absence of contaminants

Application

Brush, roller, spray
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use short - haired rollers.

Shelf life

2 years in a cool and dry place (max 40° C)

Packs

Comp A Lt. 16, Lt. 2,5, Lt. 0,750 Thinner Lt. 25 – Lt. 5 – Lt.