Code
0803
Description
IBreathable anti-mould hydro paint for walls incorporated with a high concentration of anti-mould and anti-alagae salts. This anti-mould paint has a good coating and spread capacity and an excellent adehesion to the surface.
Use
Casapura is recommended for the painting of inner walls which need protection from mould. It is suggested for places where steam is generated: kitchens, bathrooms, greenhouses, cheese factories, slaughterhouses, swimming pools, breweries.
Appearance of the film
Matt
Color
White and colour chart
Component
1
Hardening
Physical by evaporation of water and coalescence of the polymer.
Specific weight
From 1,600 gr/ml
VOC
40 gr/ liter
Estimated yield
8 - 9 m²/ L for smooth medium absorption surfaces
Flash point
Component A > 114°C
Preparation of surfaces
New surfaces:
Make sure that the surfaces are completely dry. In case of mould, treat the surface with suitable healings.
Eliminate any efflorescence and detaching paints by brushing and washing them.
Prime with acrylic fixative.
Old paints:
Eliminate the old detaching paints. Paints based on tempera and lime should be removed by brushing and washing.
Make sure that the surfaces are completely dry. In case of mould, treat the surface with suitable healings.
Eliminate any efflorescence and detaching paints by brushing and washing them.
Prime with acrylic fixative.
Old paints:
Eliminate the old detaching paints. Paints based on tempera and lime should be removed by brushing and washing.
Preparation of the product
Mix the product before use and add water
Component A 100
Water max 30%
Component A 100
Water max 30%
Environmental conditions
Ambient temperature: from + 5 to 40°C
Temperature of the surface: > 10°C
Humidity: 0 – 80 %
To prevent the formation of condensation, the temperature of the surface must be at least 3 ° C higher than the dew point.
Temperature of the surface: > 10°C
Humidity: 0 – 80 %
To prevent the formation of condensation, the temperature of the surface must be at least 3 ° C higher than the dew point.
Drying and hardening time
For thicknesses of 50 microns 10°C 20°C 30°C
Dry to the touch 3 1 0,5 hours
Dry in depth 8 4 -5 2
Dry to the touch 3 1 0,5 hours
Dry in depth 8 4 -5 2
Time of overpainting
Minimum: (hrs) 10°C 20°C 30°C
8 4 3
Maximum: unlimited, except for the presence of contaminants on the surface.
8 4 3
Maximum: unlimited, except for the presence of contaminants on the surface.
Application
Brush and paint roller.
For brush applications use nylon or pure bristle brushes.
For roller applications use medium-hair rollers.
For the application use the method of the crossed hands
For brush applications use nylon or pure bristle brushes.
For roller applications use medium-hair rollers.
For the application use the method of the crossed hands
Shelf life
2 years in a cool and dry place (max 40 ° C)
Packs
Comp A L 14 L5 L 2.5