Logo

PRIMER AI SILICATI

Impregnating

Consolidation

prodottimuralidipreparazione

Code

0606

Description

Potassium silicate modified with acrylic dispersion

Use

To use the consolidation and impregnation of wall surfaces prior to application of coatings silicate .
Suitable for lime plasters or equivalent advised of plaster and plasterboard, on old paint .

Appearance of the film

Matt

Component

1

Hardening

Fisico per evaporazione dell’acqua e coalescenza del polimero.

Specific weight

from   1,130      gr/ml

VOC

20  gr/ liter

Theoretical yield

8-9 sqm / liter of medium porosity media

Flash point

Component A                                 > 114°C                                        

Surface preparation Coatings :

Make sure that the support has exceeded a curing time of 28 days and that the humidity is below 10%.
Remove efflorescence by washing and brushing .
Old paint must be totally removed .
Any alterations or leveling must be carried out with mortars compatible with the potassium silicate ( premixed plasters , lime , cement).

Product Preparation:  

mix the product before use and add water
Component A 100
water 100

Estimated yield

Ambient temperature :          + 5 to 40 ° C
Substrate temperature :        > 10 ° C
Humidity :                              0-75 %
To prevent the formation of condensation it is necessary that the surface temperature is at least 3 ° C above the dew point.
Avoid application in the presence of excessive moisture or under the direct rays of the sun.

Drying and curing

                             10 ° C    20 ° C        30 ° C
Touch dry after       5            1 .              5 hours
Hard Dry                24          12              6

Application

Brush , roller
For brush application use brushes made of nylon or pure bristle .
For roller application use a medium-haired roller .
For the application to use the method of crossed hands

Shelf life

1 year in a cool dry place (min 5 ° C max 35 ° C)

Packs

Lt. 20 Lt. 5 Lt. 1