QUARZO LUX NORMALE
Made of quartz flour
Based on vinyl resins
Resistant to the bad weather
Code
0819
Description
Quartz washable water – based paint made of vinyl – venetic resins and photo – resistant pigments. This product is suitable for mural coverings. It has an excellent washability and a good ease in application. It lets the wall breathe, offering an excellent resistance to the bad weather.
use
« QUARZO LUX NORMALE » is used for the painting of the exterior and interior walls, constructions in reinforced concrete, gypsum, exposed bricks, and so on.
In addition to exalting the resistance features, quartz allows to apply thicknesses that are superior to the normal washable paints. So it masks any imperfections of the support.
In addition to exalting the resistance features, quartz allows to apply thicknesses that are superior to the normal washable paints. So it masks any imperfections of the support.
Appearance of the film
Matt
Colour
White – color chart
Component
1
Hardening
Evaporation of the solvents and union of the polymer
Specific weight
From 1,570 gr/lt
Volume of solids
43%
VOC
40 gr/ liter
Minimum thickness
50 -60 micron
Estimated yield
8,6 m² / litre for a thickness of 50 micron
Flash point
Component A > 114°C
Temperature resistance
Max 60°C
Preparation of surfaces
New surfaces:
Prime with an acrylic insulating product (« Imprimitura Acrilica »). If there are surfaces with high alkalinity (lime plasters, new ready – mix plasters), use a neutralizing universal insulating product, based on resistant alkali resins ( « Primer/P »).
It is recommended to do the same operation if there are surfaces previously treated with lime or flour.
Prime with an acrylic insulating product (« Imprimitura Acrilica »). If there are surfaces with high alkalinity (lime plasters, new ready – mix plasters), use a neutralizing universal insulating product, based on resistant alkali resins ( « Primer/P »).
It is recommended to do the same operation if there are surfaces previously treated with lime or flour.
Preparation of the product
Mix the product before the use and add water
Component A 100
Water max 40 %
Component A 100
Water max 40 %
Environmental conditions
Ambient temperature: from + 8 to 40° C
Temperature of the support: > 10° C
Humidity: 0 – 80 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Temperature of the support: > 10° C
Humidity: 0 – 80 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Drying and hardening time
For the thickness of 50 micron 10° C 20° C 30° C
Dry to touch 3 1 0,5 hours
Dry in depth 8 4 - 5 2 hours
Dry to touch 3 1 0,5 hours
Dry in depth 8 4 - 5 2 hours
Time of overpainting
Minimum (hours) 10° C 20° C 30° C
8 4 3
Maximum unlimited in the absence of contaminants
8 4 3
Maximum unlimited in the absence of contaminants
Application
Brush, roller, spray
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium-haired rollers.
For the application, it is necessary to use the method of crossing coats.
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium-haired rollers.
For the application, it is necessary to use the method of crossing coats.
Shelf life
2 years in a cool and dry place (max 40° C)
Packs
Comp A Lt. 14 Lt. 5 Lt. 2,5