Primer based on modified alkyd resin with fast drying. It has a dual anti -corrosive action: chemical and with barrier effect.
Use
This product is used as a primer on steel in painting cycles of products exposed to environments with low or medium aggressiveness.
Appearance of the film
Matt
Color
Grey, red
Component
1
Hardening
Physical hardening through evaporation and chemical oxidation
Specific weight
1,450 gr/ml
Volume of solids
51%
VOC
480 gr/ liter
Minimum thickness
60 micron
Estimated yield
8,5 m² / litre for a thickness of 60 microns
Flash point
Component A 27°C
Salt spray resistance
Minimum 500 hours
Temperature resistance
100° C continuously 140° C discontinuously
Preparation of surfaces
New steel: mechanical cleaning at the grade SSPC- St3 (brushing) Painted steel: sanding and brushing to remove all parts that are peeling off
Preparation of the product
Mix the product before the use
Thinning
10 - 15 % with a synthetic thinner
Environmental conditions
Ambient temperature: from + 5 to 40° C Temperature of the support: > 10° C Humidity: 0 - 85 % In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Drying and hardening time
For the thickness of 100 microns (wet) 10° C 20° C 30° C Dry to touch 3 0,5 0,2 hours Dry in depth 12 6 4 hours
Time of overpainting
Minimum (hours) 10° C 20° C 30° C 24 8 4 hours Maximum (months) unlimited after removal of contaminants