RESINSCUDO
Transparent Polyurethane Coating
Suitable for any substrate
Resistant to abrasion, UV rays and weathering
Description
Single-component transparent polyurethane coating based on moisture-curing aliphatic polyisocyanates, designed for tiled balconies and terraces.
Easy to apply, resistant to UV rays and yellowing.
Good resistance to alkaline and acidic solutions, as well as foot traffic.
Single-component = ready to use, no mixing required.
Moisture-curing = hardens by reacting with humidity in the air.
________________________________________
Easy to apply, resistant to UV rays and yellowing.
Good resistance to alkaline and acidic solutions, as well as foot traffic.
Single-component = ready to use, no mixing required.
Moisture-curing = hardens by reacting with humidity in the air.
________________________________________
Applications
Applications Waterproofing and repair of tiled balconies and terraces with porcelain stoneware, ceramic or terracotta tiles, and as a protective coating for exposed concrete structures (fair-faced concrete).
Film appearance
GLOSSY
Colour
TRANSPARENT
Components
1
Curing method
Chemical polymerisation: reaction with ambient moisture
Specific gravity
1,060 gr/ml
Solid volume
80+-2 %
VOC (volatile organic compounds)
350 gr/ litro
Minimum dry film thickness
200 micron
Theoretical coverage
2.7 m²/litre at 200 microns dry film thickness
Flash point
Component A: 34°C
Thinner: 34°C
Thinner: 34°C
Temperature resistance
From -20°C to +80°C
Chemical Resistance
Good resistance to acidic and alkaline solutions (5%), detergents, sea water, lubricants and fuels
Surface Preparation
The substrate must be dry, clean and free from contaminants such as oils, grease, silicones or any other agents that may impair adhesion. New concrete must be left to cure for at least 28 days and moisture content must be below 4%.
Product Preparation
No preparation required
• Component A: 100 parts
• Thinner (PMS Solvent): 20%
• Component A: 100 parts
• Thinner (PMS Solvent): 20%
Application Instructions
On well-cleaned tiled surfaces, it is recommended to apply a single coat diluted at 20%. Additional coats must be applied within 12–18 hours. For waterproofing purposes, a thickness of 300–350 microns is recommended. In areas with heavy foot traffic, double thickness is required, with the addition of quartz sand or polyethylene wax — to be mixed in at time of use — in order to reduce slipperiness.
?? The product must never be applied on surfaces affected by rising damp.
?? The product must never be applied on surfaces affected by rising damp.
Application Conditions
Ambient temperature +15°C to +40°C
Substrate temperature Above +10°C
Relative humidity 40–85%
To prevent condensation, the substrate temperature must be at least 3°C above the dew point.
Substrate temperature Above +10°C
Relative humidity 40–85%
To prevent condensation, the substrate temperature must be at least 3°C above the dew point.
Drying and Curing Times
Dry to touch 6–8 hours
Light foot traffic After 24–48 hours
Full cure Approx. 7 days at 20–22°C, 65% relative humidity
Light foot traffic After 24–48 hours
Full cure Approx. 7 days at 20–22°C, 65% relative humidity
Overcoating Window
Maximum 24–36 hours.
Application Method
Brush or roller
• For brush application: use nylon or pure bristle brushes.
• For roller application: use a medium-nap roller.
• Apply using the cross-coating method (alternating direction with each coat).
• For brush application: use nylon or pure bristle brushes.
• For roller application: use a medium-nap roller.
• Apply using the cross-coating method (alternating direction with each coat).
Shelf Life
6 months in a cool, dry place (max 40°C).
Packaging
• Component A: 5 L — 1 L
• Thinner: 1.5 L
• Thinner: 1.5 L