Code
0624
Description
It is a stabilizing fixative product, that can be diluted in water, based on styrene – acrylic copolymers.
Since it is pigmented, it gives an initial covering of the support.
Since it is pigmented, it gives an initial covering of the support.
Use
This product is suitable to consolidate and make uniform new and old plasters, concrete surfaces, old paints, but they must be dry and well adherent. In addition to improve all the features of the plaster, it gives a better application of all the decorative products, favouring the perfect adherence.
Appearance of the film
Matt
Colour
White – color chart
Component
1
Hardening
Evaporation of the solvents and union of the polymer
Specific weight
1,570 gr/ml
Volume of solids
45,5%
VOC
15 gr/ liter
Minimum thickness
50 micron
Estimated yield
9,1 m² / litre for a thickness of 50 micron
Flash point
Component A >113°
Preparation of surfaces
Make sure that the support is completely dry, remove possible efflorescence and old paints that are peeling off with brushes. Remove totally old layers of lime and tempera paint.
Preparation of the product
Mix the product before the use
Thinning
20 – 25% with water
Environmental conditions
Ambient temperature: from + 5° C to 35° C
Temperature of the support: > 5° C
Humidity: 0 % – 75 %
Avoid the applications if there is a surface condensation or under the direct action of the sun.
Temperature of the support: > 5° C
Humidity: 0 % – 75 %
Avoid the applications if there is a surface condensation or under the direct action of the sun.
Drying and hardening time
25° C and 65 % relative humidity
35 – 45 minutes
35 – 45 minutes
Time of overpainting
4 – 5 hours
Application
Brush, roller
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium-haired rollers.
For the application, it is necessary to use the method of crossing coats.
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium-haired rollers.
For the application, it is necessary to use the method of crossing coats.
Shelf life
1 year in a cool and dry place (max 40° C)
Packs
Lt. 14 Lt. 5 Lt. 2,5