SCRIVI E RISCRIVI
Decorative paint
For internal places
Based on acrylic resins in water dispersion.
Code
0739
Description
It is a decorative paint that makes the surface writable with white or colored chalks. It is easily cleaned with a duster or a soft cloth. It transforms the walls in large blackboards where children can play, express their thoughts and where you can write down notes, messages, sentences, daily menu, shopping list, and so on.
It makes the place where it is applied modern and playful.
It is a product based on acrylic resins in water dispersion.
It makes the place where it is applied modern and playful.
It is a product based on acrylic resins in water dispersion.
Use
This paint is indicated for the painting of the walls of internal places; it can be used in houses, offices, children’s recreation centers, schools, relaxation areas, or in any other place where you want to create a writable wall.
It is a decorative paint easy to use and it is applied as a normal paint..
It is a decorative paint easy to use and it is applied as a normal paint..
Appearance of the film
Matt
Appearance
Liquid
Color
White - black - colored
Component
1
Hardening
Physical hardening through evaporation of water
Specific weight
About 1.100 gr/ml
VOC
50 gr/ liter
pH
7.0-9.0
Estimated yield
10 - 13 m² / litre according to the absorption of the substrate
Flash point
> 100°C
Application
Fill and prime the surfaces; on the substrates very absorbent, it is necessary to give also a priming coat.
Apply 3 coats of paint effect blackboard in order to obtain a good magnetic power; between the coats, it is necessary to spend at least 4 - 5 hours.
The product is writable after seven days.
The paint should be applied as a normal paint, using the method of crossing coats.
It can be applied both with a brush and with a roller.
If you choose the first option, you have to use nylon or natural bristle brushes.
If you choose the second option, you have to use rollers with rubber tops or short - haired rollers.
Apply 3 coats of paint effect blackboard in order to obtain a good magnetic power; between the coats, it is necessary to spend at least 4 - 5 hours.
The product is writable after seven days.
The paint should be applied as a normal paint, using the method of crossing coats.
It can be applied both with a brush and with a roller.
If you choose the first option, you have to use nylon or natural bristle brushes.
If you choose the second option, you have to use rollers with rubber tops or short - haired rollers.
Preparation of the product
Diluted al 10%
Environmental conditions
Ambient temperature: from + 8 to 40° C
Temperature of the support: > 10° C
Humidity: 0 - 80 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Temperature of the support: > 10° C
Humidity: 0 - 80 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Precautions:
Do not use chalks with the point shaped like a nail (they may scratch the substrate); it is recommended to use a little the points of the chalks.
Do not apply on wet surfaces.
Do not apply at temperature below 10° C
Do not apply when humidity is above 80 %
Do not apply on wet surfaces.
Do not apply at temperature below 10° C
Do not apply when humidity is above 80 %
Drying and hardening time
20° C
Dry to touch 1 hour
Dry in depth 4 hours
Crystallized 7 days
Dry to touch 1 hour
Dry in depth 4 hours
Crystallized 7 days
Time of overpainting
Minimum (hours) 20° C
4 - 5 hours
Maximum unlimited in the absence of contaminants
4 - 5 hours
Maximum unlimited in the absence of contaminants
Shelf life
1 year in a cool and dry place (max 40° C)
Packs
Lt. 0,750