Anti - fouling product with long lasting and efficacy; it is free from organostannic compounds.
Use
This product is used for all hulls and it is compatible with all synthetic and epoxy substrates..
Appearance of the film
Matt
Color
Red, black, blue, white
Component
1
Hardening
Physical hardening through evaporation of solvents
Specific weight
1,570 gr/lt
Volume of solids
45%
VOC
320 gr/lt
Minimum thickness
60 micron
Estimated yield
7,5 m² / litre for a thickness of 60 microns
Flash point
Component A 34° C Thinner 34° C
Preparation of surfaces
On substrates primed, clean and free of contaminants, apply two coats for a total thickness of about 100 - 120 microns.
Preparation of the product
Mix the product before the use and add the thinner Component A 100 Thinner 5 - 10 %
Environmental conditions
Ambient temperature: from + 5 to 40° C Temperature of the support: > 10° C Humidity: 0 - 85 % In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Drying and hardening time
For the thickness of 60 microns 10° C 20° C 30° C Dry to touch 6 3 2 hours Dry in depth 12 6 4 hours
Time of overpainting
Minimum (hours) 10° C 20° C 30° C 12 6 4 hours Maximum unlimited in the absence of contaminants
Application
Brush, roller, spray If you use the brush, you have to use nylon or natural bristle brushes. If you use the roller, you have to use medium - haired rollers. For the application, it is necessary to use the method of crossing coats.