SPARTITRAFFICO I.G.
Refractive and non - refractive central line paint
Good resistance to the abrasion
Good adhesion and elasticity
Code
1008
Description
Following the instructions of the ANAS specification, « SPARTITRAFFICO I.G. » is formulated with alkyl resins and chlore - caoutchouc, selected pigments and glass small pearls in accordance with the refractive type. It has an excellent resistance to the abrasion and adhesion to the substrate, strong refractivity, fast drying and excellent covering power.
Use
This product is used as a traffic signalling device on asphalt, bitumen, cement roads, and so on.
Appearance of the film
Semi-glossy
Color
White - yellow -light blue -red
Component
1
Hardening
Physical hardening through evaporation of solvents and oxidative polymerization
Specific weight
1,500 gr/ ml
Volume of solids
42%
VOC
1,500 gr/ ml
Minimum thickness
80 – 100 micron
Estimated yield
5,2 m² / litre for a thickness of 80 microns
Flash point
Component A 27° C
Thinner 5° C
Thinner 5° C
Preparation of the product
Mix the product before the use and add the thinner
Component A 100
Acetone 5 - 10 % depending on the thickness of the dry film to be applied
Component A 100
Acetone 5 - 10 % depending on the thickness of the dry film to be applied
Environmental conditions
Ambient temperature: from + 5 to 40° C
Temperature of the support: > 10° C
Humidity: 0 - 85 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Temperature of the support: > 10° C
Humidity: 0 - 85 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Drying and hardening times
For the thickness of 100 microns 10° C 20° C 30° C
Dry to touch 30 12’ 5’
Dry in depth 4 30’ 20’
Dry to touch 30 12’ 5’
Dry in depth 4 30’ 20’
Application
Spray, brush, roller
Shelf life
2 years in a cool and dry place (max 40° C)
Packs
Comp A 28 kg - 7 kg Thinner 5 - 25