Paint based on acrylic resin in emulsion with a good drying speed.
Use
This product is used as a paint for road signs to be applied on cement, asphalt, bituminous aggregates. Drying in depth is fast (30 minutes) under normal conditions (20° C - 60 % UR), but it decreases with increasing humidity and decreasing temperature.
Appearance of the film
Matt
Color
White - yellow – light blue - black
Component
1
Hardening
Physical hardening through evaporation of water and union of the polymer
Specific weight
From 1,70 - 1,75 gr/ml
Volume of solids
60 %
VOC
45 gr/ liter
Minimum thickness
150 micron
Estimated yield
4 m² / litre for a thickness of 150 microns
Flash point
Component A > 114°C
Preparation of surfaces
Perform an accurate cleaning by removing dust and all parts that are peeling off. The substrate must be dry; the presence of excessive humidity inside the substrate, during solar irradiation, can generate vapour that causes the formation of bubbles and the subsequent detachment of the coating.
Preparation of the product
Mix the product before the use. Thin with 5 - 15 % max of water
Environmental conditions
Ambient temperature: from + 10 to 40° C Temperature of the support: > 10° C Humidity: 0 - 70 % In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Drying and hardening time
For the thickness of 150 microns 10° C 20° C 30° C Dry to touch 25' 12' 8' Dry in depth 60' 25' 15'
Application
Spray, roller If you use the roller, you have to use medium - haired rollers.