SPATOLATO 200/270/300 EXTRA PERLATO
Rustic quartz coating
High resistance
Water - repellent, waterproof
Code
0904APERLA
Description
Plastic quartz coating for internal and external places made of siliceous aggregates, granular marble, water emulsion of a 100 % acrylic copolymer and various pigments. The pigments chosen, that are among the best on the market, guarantee the color tightness over time. Even if the product is breathable, the wall surface is water - repellent and waterproof.
Use
This product is used when you want a high resistance coating with a rustic appearance. Its characteristics have a particular resistance to the impacts, to the abrasions, a high degree of resistance to the climatic and atmospheric agents, high water - repellency and impermeability.
Appearance of the film
Matt
Color
White and color chart
Components
1
Hardening
Physical hardening through evaporation of water and union of the polymer
Vapour permeability coefficient
V2
Specific weight
From 1,380 gr / ml
Absorption of water
W2
Volume of solids
51 %
Adhesion
1.1 MPa
VOC
120 gr/ litre
Durability
1.3 MpA
Thickness of the film
1 mm= 1000 micron
1,2 mm= 1200 micorn
1,5 mm= 1500 micron
1,2 mm= 1200 micorn
1,5 mm= 1500 micron
Thermal conductivity
(10,dry) 1.17 W/m*k (value table; P=50%)
Estimated yield
1 mm= Kg. 1,500 kg/mq (200).
0,7-1,2= Kg. 1,800 kg/mq. (270)
1,2 mm= Kg. 2,500 kg/mq. (300)
1,5 mm= Kg. 2,800 kg/mq. (400)
0,7-1,2= Kg. 1,800 kg/mq. (270)
1,2 mm= Kg. 2,500 kg/mq. (300)
1,5 mm= Kg. 2,800 kg/mq. (400)
Fire reaction
Euroclass F
Flash point
Component A > 114°C
Elongation%
200 for a dry thickness of 500 microns
Washability
> 10000 washes
Preparation of surfaces
New surfaces: remove any traces of dirt and of efflorescence and prime with our product « PRIMER P/PIGMENTATO » or our acrylic - based consolidating insulation product « H 95 IMPRIMITURA » and then apply one coat of our « SOTTOFONDO ».
Old surfaces: make sure that the old plaster is well adherent and, in the case of cracks, treat the substrate with our « FONDO ELASTICO FIBRATO » and then apply one coat of our « SOTTOFONDO ». In the case of crumbling plasters and that are peeling off, remove the deteriorated parts and apply one coat of our solvent - based insulation product « PRIMER P/PIGMENTATO » or one coat of our consolidating insulation product « H 95 IMPRIMITURA ».
Old surfaces: make sure that the old plaster is well adherent and, in the case of cracks, treat the substrate with our « FONDO ELASTICO FIBRATO » and then apply one coat of our « SOTTOFONDO ». In the case of crumbling plasters and that are peeling off, remove the deteriorated parts and apply one coat of our solvent - based insulation product « PRIMER P/PIGMENTATO » or one coat of our consolidating insulation product « H 95 IMPRIMITURA ».
Preparation of the product
Mix the product before the use.
For applications with a spatula, the product should not be diluted or with maximum 2 % of water.
For applications with a spatula, the product should not be diluted or with maximum 2 % of water.
Environmental conditions
Ambient temperature: from + 5 to 40° C
Temperature of the support: > 10° C
Humidity: 0 - 85 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Temperature of the support: > 10° C
Humidity: 0 - 85 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Drying and hardening time
For the thickness of 200 microns 10° C 20° C 30° C
Dry to touch 24 6 1 hours
Dry in depth 24 8 2 hours
Dry to touch 24 6 1 hours
Dry in depth 24 8 2 hours
Time of overpainting
Minimum (hours) 10° C 20° C 30° C
24 8 3 hours
Maximum unlimited in the absence of contaminants
24 8 3 hours
Maximum unlimited in the absence of contaminants
Application
Spread the product with a steel spatula and smooth with a plastic trowel.
Shelf life
1 year in a cool and dry place (max 40° C)
Packs
Comp A Kg. 24,000