SPATOLATO ANTIMUFFA ANTIALGA
BRANDED PRODUCT CE EN 15824
Rustic Quartz wall tiles
Anti-mould Anti-algae
Cod
0904A
Description
Quartz plastic coating for interior and exterior use, siliceous aggregates, granular marble, aqueous emulsion of a 100% acrylic copolymer and various pigments that give the product after complete drying impermeability to weather and atmospheric agents. The addition of specific anti-mould and anti-algae salts guarantee that the product, once dried, is impervious to mould and lichen and various organisms. While allowing the masonry to breathe, it is a water-repellent and waterproof material
Use
It is used when a high-strength coating with a good appearance is desired. Suitable for application on thermal insulation systems.
The addition of highly effective anti-mould and anti-algae salts makes the coating impervious to various microorganisms.
The addition of highly effective anti-mould and anti-algae salts makes the coating impervious to various microorganisms.
Appearance of the film
Matt
Color
White and color chart
Components
1
Hardening
Physical by evaporation of water and coalescence of the polymer.
Specific weight
From 1,860 gr/ml
Volume of solids
51%
VOC
20 gr/ litre
Vapour permeability coefficient
V2
Absorption of water
W2
Adhesion
1.1 MPa
Durability
1.3 MPa
Thermal conductivity
(10 dry) 1.17 W/m*k (tab.valore; P=50%)
Fire reaction
Euroclass F
Thickness of the film
1 mm= 1000 micron
1,2 mm= 1200 micorn
1,5 mm= 1500 micron
1,2 mm= 1200 micorn
1,5 mm= 1500 micron
Estimated yield
1 mm= Kg. 1,500 kg/mq (200).
0,7-1,2= Kg. 1,800 kg/mq. (270)
1,5 mm= Kg. 2,500 kg/mq. (300)
2,0 mm= Kg. 2,800 kg/mq. (400)
0,7-1,2= Kg. 1,800 kg/mq. (270)
1,5 mm= Kg. 2,500 kg/mq. (300)
2,0 mm= Kg. 2,800 kg/mq. (400)
Flash point
Componente A > 114°C
Elongation%
200 per uno spessore secco di 500 micron
Washability
> 10000 colpi
Preparation of surfaces
New: remove traces of dirt and efflorescence and primer with our Undercoat;
Old:
Ensure that the old plaster is well adhered and in case of cracks treat the substrate with our FIBRATED ELASTIC FUND
Old:
Ensure that the old plaster is well adhered and in case of cracks treat the substrate with our FIBRATED ELASTIC FUND
Preparation of the product
Stir the product before use.
For trowel applications the product should not be diluted
For trowel applications the product should not be diluted
Environmental conditions
Ambient temperature: + 5 to 40°C
Media temperature: > of 10°C
Humidity: 0 - 85 %.
To prevent the formation of condensation, the substrate temperature must be at least 3°C above the dew point.
Media temperature: > of 10°C
Humidity: 0 - 85 %.
To prevent the formation of condensation, the substrate temperature must be at least 3°C above the dew point.
Drying and hardening time
For thicknesses of 200 microns
10°C: 24 hours touch, 24 hours deep
20°C: 6 hours touch, 8 hours deep
30°C: 1 hour touch, 2 hours deep
10°C: 24 hours touch, 24 hours deep
20°C: 6 hours touch, 8 hours deep
30°C: 1 hour touch, 2 hours deep
Time of overpainting
Minimum (hours)
10°C: 24 hours
20°C: 8 hours
30°C: 3 hours
Maximum unlimited in the absence of contaminants
10°C: 24 hours
20°C: 8 hours
30°C: 3 hours
Maximum unlimited in the absence of contaminants
Application
Spread with steel trowel and smooth with plastic hurry.
Shelf life
1 year in a cool and dry place (max 40° C)
Packs
Comp A Kg. 24