Code
0716
Description
Transparent finish based on acrylic resins in water emulsion for internal places, which gives the substrate already painted with any type of water - based washable paint or enamel based on water or decorative paint, a particular and very pleasant shiny effect.
Use
This product can be applied on already painted wall surfaces, concrete, plaster, suitably prepared.
Appearance of the film
Matt - shiny
Color
Transparent and color chart
Component
1
Hardening
Physical hardening through evaporation of water and union of the polymer
Specific weight
From 1,00 gr/lt
VOC
40 gr/ litre
Flash point
Component A > 114°C
Temperature resistance
Max 60°C
washability
> 15000 touches
Preparation of surfaces
Remove any parts that are peeling off. Eliminate dust or any stains and apply the product.
Preparation of the product
Product ready to use. Mix well the product before the use.
Component A 100
Component A 100
Environmental conditions
Ambient temperature: from + 5 to 40° C
Temperature of the support: > 10° C
Humidity: 0 - 85 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Temperature of the support: > 10° C
Humidity: 0 - 85 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Drying and hardening times
For the thickness of 50 microns 10° C 20° C 30° C
Dry to touch 3 1 0,5 hours
Dry in depth 8 4 - 5 2 hours
Dry to touch 3 1 0,5 hours
Dry in depth 8 4 - 5 2 hours
Time for overpainting
Minimum (hours) 10° C 20° C 30° C
8 4 3 hours
Maximum unlimited in the absence of contaminants
8 4 3 hours
Maximum unlimited in the absence of contaminants
Application
It is applied with a brush, with irregular or crossed movements, or avoiding painting the same position in the same way.
Shelf life
2 years in a cool and dry place (max 40° C)
Packs
Comp A Kg. 5 – Kg. 2