TENNIS
Excellent adhesion on cement and old paints
Good resistance to alkaline and acid solutions
Excellent UV resistance
Code
1001
Description
Solvent-based modified chlorine vinyl resin based paint with good
penetrating power
penetrating power
Use
For the protection of concrete tennis courts
Appearance of the film
matt
Colour
Red
Component
1
Hardening
Physical by evaporation if solvents
Specific weight
1,350 gr/ml
Volume of solids
38 %
VOC
600 gr/ liter
Estimated yield
5 -6 m² / L per layer and on smooth and medium absorption surfaces
Flash point
Component A 34°C
Thinner 34°C
Thinner 34°C
Preparation of surfaces
New surfaces:
Make sure that the surface is free from humidity, remove any efflorescence
by brushing.
Old surfaces: Remove any peeling parts, level out any irregularities, seal
any cracks.
Old paints: Remove by brushing peeling paints and other contaminants. In
case of mould, do a preventive wash with a suitable restorer before
brushing.
Make sure that the surface is free from humidity, remove any efflorescence
by brushing.
Old surfaces: Remove any peeling parts, level out any irregularities, seal
any cracks.
Old paints: Remove by brushing peeling paints and other contaminants. In
case of mould, do a preventive wash with a suitable restorer before
brushing.
Preparation of the product
Mix the product before use and add the thinner
Component A 100
Thinner max 10% - 15% synthetic thinner
Component A 100
Thinner max 10% - 15% synthetic thinner
Environmental conditions
Ambient temperature: from+ 5 to 40°C
Temperature of the surface: >10°C
Humidity: 0 – 80 %
Humidity of the surface < 10%
To prevent the formation of condensation the temperature of the surface
must be at least 3°C higher than the dew point
Temperature of the surface: >10°C
Humidity: 0 – 80 %
Humidity of the surface < 10%
To prevent the formation of condensation the temperature of the surface
must be at least 3°C higher than the dew point
Drying and hardening times
10°C 20°C 30°C
Dry to touch 6 3 2 hours
Dry in depth 12 6 4
Dry to touch 6 3 2 hours
Dry in depth 12 6 4
Time for overpainting
Minimum (hours) 10°C 20°C 30°C
12 6 4
Maximum Unlimited, except for the presence of contaminants on the
surface
12 6 4
Maximum Unlimited, except for the presence of contaminants on the
surface
Application
Brush, roller, spray
For brush applications use nylon or pure bristle brushes.
For roller applications use medium pile rollers.
For the application use the method of the crossed hands
For brush applications use nylon or pure bristle brushes.
For roller applications use medium pile rollers.
For the application use the method of the crossed hands
Shelf life
2 years in a cool and dry place (max 40°C)
Packs
Comp A kg Thinner 5, 25, 180 lt