VELAX SATINATO
Painting - waterborne semi-gloss enamel
Excellent coverage
Complete washability
Description
Emulsion paint based on acrylic resin dispersed in water .
Use
Indicated for the treatment of surfaces in schools, hospitals , kindergartens, or for environments where we need to ensure a high resistance to washing and sanitizing .
Applicable on new plaster or old concrete surfaces , plaster , plasterboard, old paints or absorbent mineral substrates .
Applicable on new plaster or old concrete surfaces , plaster , plasterboard, old paints or absorbent mineral substrates .
Aspect of the film
Semitransparent
Colour
White and folder
Components
1
Physical aspect
water evaporation and coalescence of the polymer.
Specific weight
Da 1,330 gr/ml
Volume of solids
40%
VOC
12 gr/liter
Estimated yield
6 mq/liter
Flash point
Component A > 114°C
Temperature Resistance
Max 60°C
washability
> 25000 touches
Surface Preparation:
New surfaces:
New plaster or patches must be cured, clean, dry and flaky .
If mold is present , treat the surface with a suitable healing .
Remove efflorescence by brushing or washing .
Prime surfaces clean with water-based acrylic fixatives , it is advisable for the exterior solvent-based fixative .
Painted surfaces :
Remove any parts of paint flaking , in the case of paints distemper or lime predict the total removal by washing and brushing.
New plaster or patches must be cured, clean, dry and flaky .
If mold is present , treat the surface with a suitable healing .
Remove efflorescence by brushing or washing .
Prime surfaces clean with water-based acrylic fixatives , it is advisable for the exterior solvent-based fixative .
Painted surfaces :
Remove any parts of paint flaking , in the case of paints distemper or lime predict the total removal by washing and brushing.
Product Preparation:
Mix the product before use and add water
Component A 100
Water max 5-10 %
Component A 100
Water max 5-10 %
Environmental conditions
Ambient temperature: + 8 to 40 ° C
Substrate temperature : > 10 ° C
Humidity : 0-80 %
To prevent the formation of condensation is necessary that the temperature of the substrate is at least 3 ° C above the dew point .
Substrate temperature : > 10 ° C
Humidity : 0-80 %
To prevent the formation of condensation is necessary that the temperature of the substrate is at least 3 ° C above the dew point .
Precautions:
Do not apply on wet or uncured
Do not apply at temperatures below 10 ° C
Do not apply when humidity exceeds 80 % , in case of rain and windy conditions.
Do not apply at temperatures below 10 ° C
Do not apply when humidity exceeds 80 % , in case of rain and windy conditions.
Drying and curing thickness
from 100 microns 10 ° C 20 ° C 30 ° C
Touch dry after 3 1 .5 hours
Cured 8 4 2
Touch dry after 3 1 .5 hours
Cured 8 4 2
Minimum time for overcoating:
(hours) 10 ° C 20 ° C 30 ° C
8 4 2
Unlimited maximum in the absence of contaminants
8 4 2
Unlimited maximum in the absence of contaminants
Application
Brush , roller or spray
For brush application use brushes in nylon or bristle .
For roller applications use a medium-haired roller .
For the application to use the method of crossed hands
For brush application use brushes in nylon or bristle .
For roller applications use a medium-haired roller .
For the application to use the method of crossed hands
Shelf life
2 years in a cool dry place (max 40 ° C)
Packs
Lt. 14 - Lt. 5 - Lt. 2,5