VITRUM LUCIDO
Water - based glossy finish
Odourless, inflammable
Elastic and resistant to the weather
Description
Based on acrylic resins, it is a transparent varnish with a glossy final effect, air drying, quick hardening; the dry film has high resistance to abrasion, atmospheric and chemical agents, good flexibility and compactness.
Use
This product is used on new surfaces and on old substrates, previously painted, both in external and internal places
Appearance of the film
Glossy
Color
Colorless
Components
1
Hardening
Evaporation and union of the polymer
Specific weight
1,000 - 1,050 gr / ml
Volume of solids
33 %
VOC
40 gr/ litre
Estimated yield
8 - 9 m² / litre for wood with medium absorption
Flash point
ND
Preparation of surfaces
New or carried forward surfaces:
New metal substrates:
Remove dust and contaminants such as grease and oil from the surface.
For new wood:
Apply a thinned first coat, remove the wood hair by abrasion and apply a second coat.
For new concrete:
Adequate dust removal: apply a thinned coat followed after 24 hours by another coat as is or slightly thinned.
New metal substrates:
Remove dust and contaminants such as grease and oil from the surface.
For new wood:
Apply a thinned first coat, remove the wood hair by abrasion and apply a second coat.
For new concrete:
Adequate dust removal: apply a thinned coat followed after 24 hours by another coat as is or slightly thinned.
Preparation of the product
Mix the product before the use and add water
Component A 100
Thinner Water 10 - 20 % first coat
5 - 6 % second coat
Component A 100
Thinner Water 10 - 20 % first coat
5 - 6 % second coat
Environmental conditions
Ambient temperature: from + 8 to 35° C
Temperature of the substrate: > 5° C
Humidity: 0 - 75 %
Temperature of the substrate: > 5° C
Humidity: 0 - 75 %
Drying and hardening time
At 25° C and 65 % UR
Dry to touch 1 hour; overpainted after 7 hours
Dry to touch 1 hour; overpainted after 7 hours
Application
Brush, roller, spray
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
Shelf life
2 years in a cool and dry place (max 40° C)
Packs
Comp A Lt. 2,5 - Lt. 0,750