Code
0107
Description
One - coat finish based on modified glycerophtalic resins; it has an excellent wettability and a good anti - corrosive protection.
Use
This product is used as a one coat finish directly on clean sheet metal or on surfaces with medium rusting properties.
Appearance of the film
Glossy
Color
Color chart
Component
1
Hardening
Physical hardening through evaporation of solvents and oxidative polymerization
Specific weight
1,090 - 1160
Volume of solids
46 %
Voc
400 gr/ litr
Minimum thickness
80 - 100 micron
Estimated yield
5,750 m² / litre for a thickness of 40 microns
Flash point
27°C
Temperature resistance
80° C continuously, 120° C discontinuously
Preparation of surfaces
New steel:
Brushing, greasing in order to have clean surfaces.
Old paints:
Brushing, dust removal
Brushing, greasing in order to have clean surfaces.
Old paints:
Brushing, dust removal
Preparation of the product
Mix the product before the use and add the thinner
Component A 100
Thinner 0 - 5 %
Component A 100
Thinner 0 - 5 %
Environmental conditions
Ambient temperature: from + 5 to 40° C
Temperature of the support: > 10° C
Humidity: 0 - 85 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Temperature of the support: > 10° C
Humidity: 0 - 85 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Drying and hardening time
For the thickness of 80 microns 10° C 20° C 30° C
Dry to touch 8 3 1 hours
Dry in depth 24 12 5 hours
Dry to touch 8 3 1 hours
Dry in depth 24 12 5 hours
Time of overpainting
Minimum (hours) 10° C 20° C 30° C
24 12 6 hours
Maximum unlimited in the absence of contaminants
24 12 6 hours
Maximum unlimited in the absence of contaminants
Application
Brush, roller
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
Shelf life
2 years in a cool and dry place (max 40° C)
Packs
Lt. 0,750