Code
0303
Description
« LOPAC » is a classical cemented primer for wood, but based on water (acrylic) with all the advantages of toxicity and respect for the environment that characterize our water products. It has an excellent dilatation compared to similar solvent - based products, high flexibility in application and hardening while maintaining a good sanding.
Use
This product can be applied on any wooden substrates or wall surfaces, in one or two coats depending on the degree of filling required.
Appearance of the film
Matt
Color
White
Component
1
Hardening
Physical hardening through evaporation of water and union of the polymer
Specific weight
1,280 gr/lt
Volume of solids
38,8 %
Voc
48 gr/liter
Minimum thickness
50 - 60 micron
Estimated yield
6,4 m² / litre for a thickness of 50 microns
Flash point
> 114°C
Temperature resistance
Max 60°C
Preparation of surfaces
New surfaces:
New wood: before applying « LOPAC », if necessary, fill with « RESINSTUK ».
Wood with old paints well adherent: before applying « LOPAC », sand carefully.
Wall: use « LOPAC » in order to avoid the detachment of old paints before using our water - based enamel « Nubilia ». In the presence of surfaces with high alkalinity (lime plasters), use a universal neutralizing insulating product, based on resistant alkali resins.
The same treatment is recommended in case of surfaces previously treated with lime or powder products.
New wood: before applying « LOPAC », if necessary, fill with « RESINSTUK ».
Wood with old paints well adherent: before applying « LOPAC », sand carefully.
Wall: use « LOPAC » in order to avoid the detachment of old paints before using our water - based enamel « Nubilia ». In the presence of surfaces with high alkalinity (lime plasters), use a universal neutralizing insulating product, based on resistant alkali resins.
The same treatment is recommended in case of surfaces previously treated with lime or powder products.
Environmental conditions
Ambient temperature: from + 5 to 40° C
Temperature of the support: > 10° C
Humidity: 0 - 85 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Temperature of the support: > 10° C
Humidity: 0 - 85 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Drying and hardening time
For the thickness of 50 microns 10° C 20° C 30° C
Dry to touch 3 1 0,5 hours
Dry in depth 8 4 - 5 2 hours
Dry to touch 3 1 0,5 hours
Dry in depth 8 4 - 5 2 hours
Time of overpainting
Minimum (hours) 10° C 20° C 30° C
8 4 3 hours
Maximum unlimited in the absence of contaminants
8 4 3 hours
Maximum unlimited in the absence of contaminants
Application
Brush, roller
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats
Shelf life
2 years in a cool and dry place (max 40° C)
Packs
Comp A Lt. 2,5 – Lt. 0,750