Code
0106
Description
Hand - finish based on modified glycerophthalic resins. It has a dual anti – corrosive chemical action and with a barrier effect.
Use
This product is used as a one - coat finish directly on clean sheet metal for the protection of wood and metal works where you want to give an antiqued effect.
Appearance of the film
Matt
Color
Color chart
Component
1
Hardening
Physical hardening through evaporation of solvents and oxidative polymerization
Specific weight
1,620
Volume of solids
50%
Voc
400 gr/liter
Minimum thickness
80 - 100 micron
Estimated yield
6,250 m² / litre for a thickness of 80 microns
Flash point
27°C
Temperature resistance
80° C continuously, 120° C discontinuously.
Preparation of surfaces
New steel:
Brushing, greasing, anyway clean surfaces.
Old paints:
Brushing, dust removal
Brushing, greasing, anyway clean surfaces.
Old paints:
Brushing, dust removal
Preparation of the product
Mix the product before the use and add the thinner
Component A 100
Thinner 10 - 20 % depending on the thickness of the dry film to be applied.
Component A 100
Thinner 10 - 20 % depending on the thickness of the dry film to be applied.
Environmental conditions
Ambient temperature: from + 5 to 40° C
Temperature of the support: > 10° C
Humidity: 0 - 85 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Temperature of the support: > 10° C
Humidity: 0 - 85 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Drying and hardening time
For the thickness of 80 microns 10° C 20° C 30° C
Dry to touch 8 3 1 hours
Dry in depth 24 12 5 hours
Dry to touch 8 3 1 hours
Dry in depth 24 12 5 hours
Time of overpainting
Minimum (hours) 10° C 20° C 30° C
24 12 6 hours
Maximum unlimited in the absence of contaminants
24 12 6 hours
Maximum unlimited in the absence of contaminants
Application
Brush, roller, spray
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
Shelf life
2 years in a cool and dry place (max 40° C)
Packs
Comp A Lt. 2,5 - Lt. 0,750 Thinner Lt. 25 - Lt. 5 - Lt. 1