Resing
Modified alkyd finish
Brilliant and elastic
Excellent resistance to the atmospheric agents
Code
0101
Description
Finish based on urethane - alkyd resins
Use
This product is used as a final coat in synthetic cycles for the protection of wood products and manufactures to be used in industrial and marine environments.
Appearance of the film
Brillant
Color
White - color chart - RAL colors
Component
1
Hardening
Physical hardening through evaporation of solvents and oxidative polymerization
Specific weight
1,000 - 1,180
Volume of solids
50 - 55%
Voc
380 gr/ liter
Minimum thickness
50 - 60 micron
Estimated yield
10 m² / liter for a thickness of 50 microns
Flash point
>34°C
Brillance
> 90 Gloss
Temperature resistance
100° C continuously 140° C discontinuously
Preparation of surfaces
Surfaces primed with a synthetic or epoxy prime
Preparation of the product
Mix the product before the use and add the thinner
Component A 100
Thinner 5 - 10 % depending on the thickness of the dry film to be applied.
Component A 100
Thinner 5 - 10 % depending on the thickness of the dry film to be applied.
Environmental conditions
Ambient temperature: from + 5 to 40° C
Temperature of the support: > 10° C
Humidity: 0 - 85 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Temperature of the support: > 10° C
Humidity: 0 - 85 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Drying and hardening time
For the thickness of 80 microns (wet) 10° C 20° C 30° C
Dry to touch 6 2 1 hours
Dry in depth 24 12 8 hours
Dry to touch 6 2 1 hours
Dry in depth 24 12 8 hours
Time of overpainting
Minimum (hours) 10° C 20° C 30° C
24 12 8 hours
Maximum (months) unlimited after the removal of contaminants
24 12 8 hours
Maximum (months) unlimited after the removal of contaminants
Application
Brush, roller, spray
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
Shelf life
1 year in a cool and dry place (max 40° C)
Packs
Lt. 2,5; Lt. 0,750