The URBAN style is a particular type of room DESIGN that is represented by the presence of very distinctive metropolitan and industrial atmospheres.

Furnishing rooms in urban style allows you to create trend, while maintaining a warm, colorful and cozy atmosphere.

It is a particularly sought-after and flexible style today, as it can be used in private residences, offices or stores and is suitable for both city environments and locations located outside metropolitan settings.

The urban style, tends to find its greatest expression in large and spacious environments where one can best be inspired by the principles of minimalism and essentiality and where the gaze of the person observing can wander freely everywhere, with painted walls and few furnishing elements.

The typical elements of urban furniture are:

  • old industrial lamps,
  • pipes to be used as furniture frames,
  • simple decorative wall paints that evoke the outdoors,
  • old typewriters or sewing machines,
  • floor or ceiling paddle fans,
  • antique trunks or wall clocks,
  • unfinished metal shelving units

 

It is good to remember that the decoration should remain essential and with few elements, to avoid the feeling of excessive confusion

The most commonly used materials for urban style include:

  • the bricks or concrete for the walls,
  • the exposed beams for the ceiling,
  • resin or concrete for the floors.

 

This, unfortunately, very often also involves very complex and rather expensive work, and many times we give up if certain elements are not already present within our premises or we do not have major renovations planned.

How then to create a URBAN style without necessarily having to intervene with overly expensive or invasive work?

OXIDE – the URBAN decorative paint

The paradox that arises when talking about OXIDE is that for hundreds of years we have struggled to defeat rust, and now we do everything to be able to have it.

But the amazing thing about today is that we can induce oxidation of substrates and achieve wonderful decorative effects that are perfectly in line with the URBAN – CONTEMPORARY style.

OXIDE is a new version of decorative that can be used both internally and externally but especially on both wall and metal substrates.

Therefore, by decorating some walls and repainting old metal shelves that would become excellent furnishing accessories, we can quickly and without exaggerated costs, recreate our URBAN style in the rooms where we want it

And there’s more.. by inducing oxidation on metal supports, we achieve a double effect:

  • Stabiliamo noi quanto importante e forte deve essere il suo livello di ossidazione stessa
  • Il supporto verrà protetto da successive ossidazioni, perché la pittura stesa farà da protezione

 

WHAT IS OXIDE?

OXIDE is a coating based on acrylic resins and micaceous pigments of the finest choice, water-dilutable that can make any surface resemble rusted iron in an extremely realistic way to the touch and uneven appearance, the result is possible through chemical oxidation of the paint.

It is composed of an “OXIDE” base and an oxidizing solution. It is possible to obtain various rust effects, more or less homogeneous, more or less obvious, depending on the application, the mode of application of the number of passes, the amount of solution deposited on “OXIDE” by the tool, the oxidizing solution.

To reduce the natural chalking of the oxidized surface, we can apply a coat of NUBILAC TRANSPARENT GLOSSY by brush, within 24 hours, so the surface will be protected.

 

COME SI PREPARANO LE SUPERFICI DA DECORARE CON OXIDE??

  • New surfaces:

Prepare the substrate according to common application rules. Clean and sand the walls, removing all friable parts; apply a coat of ACRILSOL acrylic fixative to equalize absorption.

  • Old surfaces:

Remove all detaching parts, putty, after which sand and apply a coat of our acrylic fixative ACRILSOL. In the case of old or flaking surfaces, apply a coat of our acrylic consolidating fixative H95 IMPRIMITURA.

  • Metal surfaces:

In case of iron, aluminum, light alloy, galvanized substrates, clean the substrate thoroughly, remove any traces of dirt, oil, etc., and apply directly.

HOW TO APPLY OXIDE?

Once the wall is prepared, apply “OXIDE” diluted 20-30% with the brush, making sure to cross brush strokes. When dry (about 4 hours) stroke the wall with the dry brush, and then proceed to apply the second coat in the same way.

Once the second coat has dried, again stroke the wall with the dry brush and begin the oxidizing solution with a marine sponge or pad, allow to dry, and after at least two hours proceed with the second coat of oxidizing solution.

After about 24 hours you will begin to see the first signs of oxidation.

Remember that in order to keep the surface protected over time, it is recommended that, within 24 hours, a coat of our water-based NUBILAC TRANSPARENT SHINING varnish be applied by brush.

TUTORIAL OF OXIDE APPLICATION

Sono Pasquale Semeraro, titolare ella Resina Color con sede a Putignano (BA) Italy.

Sono figlio d’arte, nel senso che mio padre Michele ha fondato l’azienda nel 1972 ed io ci sono praticamente nato e cresciuto dentro, fino a prenderne il completo controllo negli ultimi anni.

L’idea di scrivere un blog, anzichè il solito sito tradizionale, nasce dal fatto che molta gente fuori è indirizzata nella scelta dei materiali per tinteggiare casa, più da informazioni commerciali che da informazioni corrette che abbiano come unico scopo risolvere realmente i problemi.

Grazie per la tua presenza in questo blog e se trovi le informazioni utili, mi farebbe piacere le condividessi con i tuoi amici.

Ciao Pasquale.

Se desideri maggiori informazioni compila il modulo

[contact-form to="resinacolor@gmail.com, pasqualesemeraro@resinacolor.it, francescodeleonardis@resinacolor.it," subject="informazioni dagli articoli del blog OXIDE"][contact-field label="Nome" type="name" required="1"][contact-field label="Email" type="email" required="1"][contact-field label="richiesta/domanda/messaggio" type="textarea" required="1"][contact-field label="Compilando ed inviando questo modulo, autorizzi il trattamento e la gestione dei dati immessi secondo quanto stabilisce il nuovo Regolamento Europeo (GDPR n. 679/2016) in materia di privacy e protezione dati personali. Per maggiori informazioni leggi la nostra Privacy Policy prima di inviare. Acconsenti all'invio?" type="checkbox" required="1"][/contact-form]

cerca qua

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
post
page
Filter by Categories
ANTI RUST RANGE
anti‑mold
anti‑mold additives
AUXILIARIES AND DILUENTS
BICOMPONENT PRODUCTS
Catalog and Products
ECOLOGICAL RANGE
INDUSTRY RANGE
MARINE RANGE
mold
news
PLATINUM LINE
PRIMERS AND PLASTERS
PROFESSIONAL PRODUCTS
RECLAIM PRODUCTS
RESINUM LINE
roof insulation
Senza categoria
SPECIAL PRODUCTS
SYNTHETIC ENAMELS
THERMIC INSULATION
WALL FINISHING PRODUCTS
WALL PLASTICATED PRODUCTS
WALL PREPARATION PRODUCTS
WOOD RANGE

Lavora con noi

Opportunità:

  • Agenti Rappresentanti Plurimandatari – Settore Edilizia
  • Agenti Rappresentanti Plurimandatari – Settore Ferramenta E Colorifici

  • Ferramenta E Colorifici In Cerca Di Nuovi Partner

  • Distributori O Grossisti – Settore Colorifici Ed Edilizia

  • Imprese Edili In Cerca Di Qualità

  • Decoratori Che Valorizzano La Qualità