Seta

Silk has always been regarded as the finest piece of cloth par excellence and the pride to create luxurious clothes; so the decorative SETA brilliantly takes the place of luxury masterpiece.

Its light cuts, its delicate luminescences see to it that the environment decorated with SETA conveys delicate and suggestive emotions, making every piece of furnishing (that are present) an important and luxurious piece, exactly as when a queen is wrapped in her precious clothes.

Not by chance even today in the most important events, mainly for a woman, they prefer to wear a silk dress to pay homage to beauty.

The same happens for the walls decorated with SETA, that make the house a princess in her bridal dance.

DESCRIPTION

Finish based on acrylic resins in water emulsion and special particle – size pigments with metal effect.

PREPARATION OF THE SURFACES

New surfaces: apply a coat of our insulating product “IMPRIMITURA ACRILICA” diluted with water in ratio 1 to 5 (mix each liter of “IMPRIMITURA ACRILICA” with 5 liters of water).

Old surfaces: remove any parts that are peeling off and, after a careful cleaning of the substrate, apply a coat of our insulating product “IMPRIMITURA ACRILICA” diluted with water in ratio 1 to 5 (mix each liter of “IMPRIMITURA ACRILICA” with 5 liters of water).

APPLICATION

After an appropriate preparation of the substrate, apply the product as follows: apply a coat of our white product SABBIAFOND with brushes or roller diluted with water to 20 – 25 %.

FIRST COAT: dilute the finish with water to 10 – 15 %, and apply the product with a short – haired wool roller. Let it dry for about 3 hours.

SECOND COAT: after 3 – 4 hours with a diluted product, apply a second coat, in a regular way, with a short – haired wool roller. Immediately afterwards, with the still wet substrate, work with the plastic trowel proceeding with continuous circular movements.

THIRD COAT: after 3 – 4 hours with a diluted product, apply a second coat, in a regular way, with a short – haired roller. Immediately afterwards, work the substrate still wet with the plastic trowel proceeding with continuous circular movements.

In this video tutorial I show you how to create your wall decorated with SETA